{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
NC high pressure vice T-Rex, Type: 125
Article no.: 452876
Catalog no.: 361202
Article code:
Product details
Technical Data
| Min. clamping range, 1 | 0 mm | |
| Colour, grey | Graphite grey | |
| Series | T-Rex | |
| Part described, Graphite grey | Grundkörper | |
| Max. clamping range, 1 | 125 mm | |
| Manufacturer’s designation | NC-Hochdruckspanner T-Rex, Typ: 125 | |
| Clamping range | 1 | |
| Colour | grey; orange | |
| Clamping range quick adjustment | no | |
| Pipes can be clamped | no | |
| Min. overall length L | 256 mm | |
| Base body width B | 154 mm | |
| Interchangeable jaws | yes | |
| Distance between end face and clamping face t | 127 mm | |
| Carriage height c1 | 21 mm | |
| Clamping strip height g | 130 mm | |
| Clamping force selection | maximum clamping force | |
| Clamping force | 40 kN | |
| With power intensifier | yes | |
| Maximum torque | 30 Nm | |
| Tenon slots | longitudinal slot; cross-slot | |
| Transverse slot width n | 20 mm | |
| Width of longitudinal groove l | 30 mm | |
| With bore | yes | |
| Hole diameter D | 13 mm; 25 mm | |
| Pitch | 200 | |
| With thread | yes | |
| Thread size M | M10 | |
| With width across flats | no | |
| Pivoting jaw | no | |
| Can be swivelled | no | |
| Version | hydraulic | |
| With swivel base | no | |
| Weight | 18 kg | |
| Material | spheroidal graphite iron | |
| Surface | ground; nitrided | |
| Type of product | machine vice |
Identification & Classification
| Article number | 452876 | |
| Catalog number | 361202 | |
| EAN / GTIN | 4250364401951 | |
| Manufacturer number | 6921888000155 | |
| Manufacturer/responsible person | ALLMATIC-Jakob Spannsysteme GmbH, Jägermühle 10, 87647 Unterthingau, Germany, www.allmatic.de |
Description
Version:
Top and bottom faces ground. With 25H6 M10 holes at 200 mm pitch for zero-point clamping systems.
Feature:
Sturdy, compact base body (GGG 60) with large capacity. Fully enclosed and nitrided spindle (increased operational reliability, optimised swarf protection, minimised cleaning requirement).
Function:
Clamping using adjustable torque wrench (maximum 30 Nm), requiring only minimal lost clearance around the component(in connection with jaws / gripper inserts). Using special high pressure spindle and mechanical power intensifier.
Application:
Quick and secure clamping of flame-cut and saw-cut blanks by penetration of hardened and replaceable Gripp inserts into the workpiece. Suitable for all materials with a strength of up to approximately 1000N/mm2 (exception: hardened materials).
Suitable for:
Supplied with:
4 securing bolts, hexagon screwdriver bit 3/8 inch. Additional 3 hexagon L-wrenches (5 / 8 / 10 AF).
Optional extras:
- For extension base see No. 361230 size 125.
- For gripper inserts see No. 361238 - 361250; 361260
- For stepped jaws see No. 361210; 361215.
- For fixed carrier jaw see No. 361206 size 125.
- For pivoting carrier jaws see No. 361207 size 125.
- For universal gripper set carrier jaw see No. 361208 size 125.
- For movable pivoting universal gripper set carrier jaws see No. 361209 size 125.
- For universal gripper set see No. 361345 size 125.
- For pull-down jaws see No. 361228; 361229 size 125.
- Torque wrench No. 656050 size 60
- For gripper jaws see No. 361217; 361218.
- For stepped jaws see No. 361223 size 125.
- Clamping stud No. 360025, 25M10 or 25M10/138.
- Alignment and fixing set No. 360530.