{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Coltogum fire protection gun foam 750ml
Article no.: 457223
Catalog no.: 2460
Article code:
Product details
Technical Data
| Content | 750 ml | |
| Pack | Can | |
| Paintable / Sandable | yes | |
| Colour | beige | |
| Base | Polyurethan | |
| Rainproof | yes | |
| Processing temperature | +5°C bis +35°C | |
| Elasticity | not elastic | |
| Signal word | Danger | |
| Application range | inside + outside | |
| Hazard warnings | H222 Extremely flammable aerosol.; H229 Pressurized container: may burst if heated; H351 Suspected of causing cancer; H317 May cause an allergic skin reaction.; H334 May cause allergy or asthma symptoms or breathing difficulties if inhaled.; H319 Causes serious eye irritation.; H315 Causes skin irritation.; H335 May cause respiratory irritation.; H413 May cause long lasting harmful effects to aquatic life.; EUH204: Contains isocyanates. May produce an allergic reaction. |
Identification & Classification
| Article number | 457223 | |
| Catalog number | 2460 | |
| EAN / GTIN | 7610508636606 |
Description
Description:
Ready-to-use moisture-curing polyurethane-based gun installation foam with VKF fire protection approval no. 31394 for filling, sealing and installation in areas with increased fire protection and safety requirements: - flame-retardant according to DIN 13501 - fire resistance tested up to 240 min (EI30-V-X-F w21 to 45) - corresponds to building material class B1 according to DIN 4102 - Swiss Made
Application Area:
For filling, insulating, sealing and installing in areas with increased fire protection requirements, e.g. vertical joints in mineral components (with VKF approval)
Application Notes:
The substrate must be clean, stable and free of grease. Moisten the substrate or foam layers with water before and during application. Screw the can onto the spray gun (do not overtighten/edge). Shake can vigorously (20 - 30 times). Remove fresh unwanted foam immediately with Coltogum® Foam and Gun Cleaner. After emptying the foam can, clean and rinse the gun thoroughly with Coltogum® Foam and Gun Cleaner and observe the technical data sheet and safety data sheet.