{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Carbide-tipped hammer drill, SDS-max, ⌀ × Overall length: 52X520mm
Article no.: 467194
Catalog no.: 789204
Article code:
Click to enlarge image
Click to enlarge image
Embedded cutters, soldered.
Click to enlarge image
Click to enlarge image
Product details
Technical Data
| Through-coolant | no | |
| Escape of cooling lubricant | without cooling lubricant exit | |
| Cooling lubricant | yes | |
| Wet maximum | suitable | |
| Interface position | on the machine | |
| Holder type | SDS-Max | |
| Dry machining | suitable | |
| Air | suitable | |
| Cutter diameter, min. | 52 mm | |
| Cutter diameter, max. | 52 mm | |
| Configurable | no | |
| Tolerance of cutter diameter | manufacturer tolerance | |
| Flute length | 400 mm | |
| Number of teeth | 2 | |
| Twist direction | right-hand | |
| Application for type of drilling | through hole | |
| Tool material | Carbide | |
| Coating | uncoated | |
| Interface | joint 1 | |
| Usable length | 400 mm | |
| Cutting direction | right-hand cutting | |
| Tool version | steel support with soldered hard material cutter inserts to DIN ISO 513 (Hx, Cx, Bx, Dx) | |
| Machining method | drilling into solid material | |
| Type of product | indexable drill | |
| Content | single part |
Identification & Classification
| Article number | 467194 | |
| Catalog number | 789204 | |
| EAN / GTIN | 3165140565899 | |
| Manufacturer number | 2608586807 | |
| Manufacturer/responsible person | Robert Bosch Power Tools GmbH, Max-Lang-Straße 40-47, 70771 Leinfelden-Echterdingen, Germany, www.bosch-professional.com |
Description
Version:
Special carbide insert geometry for longer tool lives.
TARGET TIP TECHNOLOGY - tip angled more acutely: More precise drilling, no slipping on the surface, aggressive drilling in concrete steel and faster drilling speed. PGM certified – verified precise and wall-plug-capable drill holes, both for chemical and for physical anchors. Large flute channels for quick evacuation of waste material, resulting in less friction.
Drill head with square cross section from ⌀ 16 mm.
TARGET TIP TECHNOLOGY - tip angled more acutely: More precise drilling, no slipping on the surface, aggressive drilling in concrete steel and faster drilling speed. PGM certified – verified precise and wall-plug-capable drill holes, both for chemical and for physical anchors. Large flute channels for quick evacuation of waste material, resulting in less friction.
Drill head with square cross section from ⌀ 16 mm.
Application:
For drilling concrete, natural stone, and masonry.
Note:
Generation SDS-max-7 with embedded carbide cutters, soldered.