{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Wedge anchor hot-dip galvanized steel FBN II 16/50 HDG
Article no.: 469684
Catalog no.: 4953
Article code:
Product details
Technical Data
| Number of nuts | 1 | |
| Material | Hot-dip galvanised steel | |
| Fixing with expansion tool | No | |
| Drive | Hexagonal | |
| Suitable for cracked concrete | Yes | |
| hef | 80 / 65 mm | |
| M | M16 | |
| Packing | Folding box | |
| l | 168 mm | |
| max. usable length handle, std./handle, min. | 50 / 65 mm | |
| d0 | 16 mm | |
| SW | 24 mm | |
| h2 | 154 mm | |
| Thread length | 112 mm | |
| Disc | 30 x 3 mm | |
| Suitable for non-cracked concrete | Yes | |
| Professional / DIY | Profi | |
| h1 | 154 mm | |
| With collar | No | |
| Number of washers | 1 | |
| Surface protection | hot-dip galvanised | |
| Head marking | S | |
| Anchoring depth | 80 mm | |
| Max. thickness of the attachment | 50 mm | |
| M x ls | M16 x 105 mm | |
| Test marks / approvals | ETA - European Technical Assessment |
Packaging units
| 1 Pack | 10 Pieces | |
| 1 Pallet | 880 Pieces |
Identification & Classification
| Article number | 469684 | |
| Catalog number | 4953 | |
| EAN / GTIN | 4048962087369 | |
| Manufacturer number | 507553 | |
| Article class | RMC |
Description
Advantage:
- The standard anchorage depth achieves the maximum load-bearing capacities. This means that fewer fixing points and smaller anchor plates are required.
- The reduced anchorage depth reduces the drill hole depth. This minimises the amount of time needed for installation whilst increasing flexibility.
- The first bolt anchor with variable working life covers the usage of bolt anchors in wet conditions and outdoor areas.
- The long thread balances component tolerances and stand-off installations, and thus increases flexibility.
- Fewer hammer blows and the minimal torque slippage allow for a noticeably simpler assembly.
- The drive-in pin protects the threaded screw from damage, and as such ensures a faster installation and dismantling of the fixture.
Application Area:
- Steel constructions
- Guard rails
- Consoles
- Ladders
- Machines
- Gates
- Façades
Approved for:
- Concrete C20/25 to C50/60, non-cracked
- Concrete C12/15
- Natural stone with dense structure
Application Notes:
- The FBN II is suitable for pre-positioned and push-through installation; also suitable for stand-off installation under certain conditions.
- Prior to installation, place the hexagon nut in the optimal position (the drive-in pin projects by approx. 3 mm out of the hexagon nut).
- When applying the torque, the cone bolt is pulled into the expansion clip and expands it against the drill hole wall.
- The head embossing offers a simple control of the anchoring.
- In the case of series installation, we recommend using the FABS bolt anchor setting tool.