{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. Nr.:
AMECOIL Clav-Sert Gewindeeinsätze leicht Stahl phosphatiert IM6/AM10
Article no.: 476095
Catalog no.: 744
Article code:
Product details
Technical Data
| d1 | M6x1.0 | |
| L | 10 mm | |
| d2 | M10x1,25 | |
| Material | Steel | |
| Surface | phosphatised |
Identification & Classification
| Article number | 476095 | |
| Catalog number | 744 | |
| EAN / GTIN | 7610508769434 | |
| Manufacturer number | 9100006100 |
Description
Description:
light version
Advantage:
- Easy and quick installation
- High load capacity
- Repair of defective threads possible
- Pre-assembled locking wedges
- The insert is fixed with wedges to prevent twisting due to torsion or vibrations
- Except for the installation tool, no other special tools are required
Technical Data:
Assembly instructions: see application images
Drilling: Drill out core hole or old thread and countersink (82° - 100°).Tapping the thread: Cut the intended thread with a standard tap.Screw in the insert: cut by hand or with an assembly tool to just below the surface (0.3x0.7 mm).
Secure: wedges with installation tool (FN748) by lightly tapping with a hammer
Application Area:
Amecoil Clavsert threaded inserts enable heavy-duty screw connections
Application Notes:
Clavsert thread inserts are extremely resilient and wear-resistant, so that the screw connection can be tightened and loosened many times without the thread coming loose. Clavsert thread inserts make it possible to reuse or repair damaged, stripped and seized threaded holes. This also makes it possible to recover rejects from high-quality products.
They can be used very easily in light metal, steel or cast parts. Clavsert are low-wear, so that multiple tightening and loosening of the screw connection is possible and they are also protected against twisting and vibration. Inserts with internal threads larger than M6 are supplied with four locking wedges instead of two.
They can be used very easily in light metal, steel or cast parts. Clavsert are low-wear, so that multiple tightening and loosening of the screw connection is possible and they are also protected against twisting and vibration. Inserts with internal threads larger than M6 are supplied with four locking wedges instead of two.