{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Machine tap for synchronised spindles HSS-E-PM, TiAlN, M: M3
Article no.: 481628
Catalog no.: 132280
Article code:
Product details
Technical Data
| Through-coolant | no | |
| Cooling lubricant | yes | |
| Manufacturer’s designation | Maschinen-Gewindebohrer für Synchronspindeln HSS-E-PM M M3 | |
| Interface position | on the machine | |
| Holder type | plain shank | |
| Shank diameter DS | 6 mm | |
| Length of shank LS | 60 mm | |
| Thread type | M | |
| Nominal diameter of metric thread D | 3 mm | |
| Thread D | M3 | |
| Thread pitch | 0.5 mm | |
| Thread tolerance class | ISO 2X 6HX | |
| Chisel edge diameter | 2.4 mm | |
| Length of tapping part Lc | 11 mm | |
| Tap infeed length | 2.4 mm | |
| Taper lead angle | 8 degrees | |
| Flute length | 18 mm | |
| Number of teeth | 3 | |
| Twist direction | neutral, straight | |
| Twist angle | 0 degrees | |
| Type of thread-cutting tool | maskinsnittapper til synkron bearbejdning | |
| Taper lead form | B | |
| Application for type of drilling | through hole | |
| To depth (x diameter) | 2.5 | |
| Number of clamping slots | 3 | |
| Core hole diameter | 2.5 mm | |
| Flank angle | 60 degrees | |
| Square-drive width across flats □ | 4.9 mm | |
| Tool material | HSS-E-PM | |
| Cutting media, manufacturer’s designation | HSS-PM | |
| Coating | TiAlN | |
| Interface | joint 1 | |
| Overall length L | 70 mm | |
| Weight | 16 g | |
| Cutting direction | right-hand cutting | |
| Standard | Werksnorm | |
| Machining method | thread processing internal (EGI) | |
| Colour ring | blue | |
| Type of product | taps |
Identification & Classification
| Article number | 481628 | |
| Catalog number | 132280 | |
| EAN / GTIN | 4045197446091 | |
| Manufacturer number | 132280 M3 | |
| Article class | 11H | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Application Table
N
40
P
37
P
35
P
22
M
12
M
10
N
35
Description
Version:
Sturdy design with spiral point and shank to DIN 1835-B.Special geometry for use on machines with synchronised spindle drives. The tap is controlled by the synchronising spindle of the machine. Special TiAlN-S coating for optimum tool life. For use with emulsion (fat content minimum 8%).