{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Solid carbide HPC drill, plain shank DIN 6535 HB, TiAlN, ⌀ DC m6 (⌀ DC X = h7): 5mm
Article no.: 482452
Catalog no.: 122661
Article code:
Product details
Technical Data
| Through-coolant | yes, with 25 bar | |
| Cooling lubricant | yes | |
| Interface position | on the machine | |
| Holder type | plain shank | |
| Shank diameter DS | 6 mm | |
| Shank length LS | 36 mm | |
| Shank type | HB | |
| Cutter diameter, min. Dc min. | 5 mm | |
| Configurable | no | |
| Tolerance of cutter diameter | tolerance class ISO | |
| Flute length Lc | 44 mm | |
| Distance from cutter corner to cutter tip | 0.91 mm | |
| Number of teeth Z | 2 | |
| Twist direction | right-hand | |
| Helix angle, min. | 30 degrees | |
| Angle, 1st step | 140 degrees | |
| Point geometry | A | |
| Tool material | solid carbide | |
| Standard designation for cutting medium, 2nd Priority | solid carbide | |
| Standard designation for cutting medium, 3rd Priority | solid carbide | |
| Machining group | M (stainless steel) | |
| Cutting media, manufacturer’s designation | VHM | |
| Coating | TiAlN | |
| Interface | joint 1 | |
| Toleranzklasse | m6 | |
| Gauge length A | 46 mm | |
| Usable length L1 | 36.5 mm | |
| Overall length L | 82 mm | |
| Functional length | 63.09 mm | |
| Weight | 34 g | |
| Cutting direction | right-hand cutting | |
| Tool version | solid carbide | |
| Standard | DIN 6537 L | |
| Data carriers | without data carrier | |
| Machining method | drilling into solid material (BVB) | |
| Colour ring | blue | |
| Machining strategy | HPC | |
| Type of product | indexable drill | |
| Ausführung (×D) | 6×D | |
| empfohlene maximale Bohrtiefe | 36.5 mm | |
| Content | single part |
Identification & Classification
| Article number | 482452 | |
| Catalog number | 122661 | |
| EAN / GTIN | 4045197457387 | |
| Manufacturer number | 122661 5 | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Application Table
P
170
P
140
P
130
P
110
P
70
M
90
M
80
K
95
Description
Version:
Cutting chisel edge with high centring accuracy due to strong core and special point geometry. High roundness and alignment accuracy of the deep hole, thanks to 4 guide chamfers. Outstanding chip evacuation due to 4 internal cooling channels from ⌀ 3.8 mm. Up to 3.7 mm ⌀ with 2 internal cooling channels. Straight major cutting edges with honed edges and special flute profile for short chips, even on long chipping materials.
Attention:
Sizes ending with X = cutter ⌀ tolerance h7.
Note:
Flute length LC = L2 + 1.5 × DC.