{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Thermoz hammer-in dowel with compound nail CN 8/110
Article no.: 491135
Catalog no.: 4865
Article code:
Product details
Technical Data
| Professional / DIY | Profi | |
| Anchor length | 110 mm | |
| min. anchorage depth | 35 mm | |
| Packing | Folding box |
Identification & Classification
| Article number | 491135 | |
| Catalog number | 4865 | |
| EAN / GTIN | 4048962080988 | |
| Manufacturer number | 507418 | |
| Article class | RMH |
Description
Advantage:
- To set with few hammer blows.
- The disc fits tight into the insulation thanks to its thickness of only 2.5 mm. Thus allows the application of low-cost, thin reinforcement layers.
- High retention forces thanks to the steel tip of the compound nail.
- Small anchoring depth of 35 mm saves on drilling times.
- The TermoZ CN is virtually free of thermal bridging due to the compound nail.
- The compression zone in the shank allows the disc to be drawn in precisely.
- Can be combined with the insulating discs DT 90, DT 110 and DT 140 for very soft insulating materials.
- For insulating material thicknesses up to 340 mm.
Application Area:
- Attachment of ETICS insulating boards on concrete and masonry
- Flush-to-surface installation in ETICS insulating materials e.g. polystyrene and mineral wool
- Building material classes A, B, C, D, E
- Concrete
- Full blocks made from concrete
- Building brick
- Solid sand-lime brick
- Hollow blocks made from lightweight concrete
- Vertically perforated brick
- Perforated sand-lime brick
- Lightweight aggregate concrete
- Aerated concrete
Application Notes:
- The fixing is set in push- through installation.
- Simple, fast setting by driving the compound nail in using a standard hammer.
- Non load bearing layers such as adhesive and old plaster are included in the maximum useful length.