{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Indexable insert for milling ZDET 16M512 FR-721, for indexable milling cutters, GH1
Article no.: 497683
Catalog no.: 220816
Article code:
Product details
Technical Data
| Wet minimum | suitable only under restricted conditions | |
| Max. cutting depth ap | 16 mm; 16 mm | |
| Wet maximum | suitable | |
| Dry machining | suitable only under restricted conditions | |
| Air | suitable only under restricted conditions | |
| Cooling lubricant | yes | |
| Series | PosiCut | |
| Base form | rectangular | |
| Thickness of insert S | 5 mm | |
| Insert version | right-hand | |
| Length of cutting edge l | 16.4 mm | |
| Corner radius R | 1.2 mm | |
| Normal clearance angle (main cutting edge) | 15 degrees | |
| ISO-Code | ZDET 16M512 FR-721 | |
| Cutting depth ap, min. | 0.05 mm | |
| Cutting depth in use | Full slot milling; Side milling | |
| Feed rate per tooth min. fz | 0.02 mm | |
| Feed rate per tooth max. fz | 0.25 mm | |
| Tool material | Carbide | |
| Machining group, manufacturer-specific | ALU | |
| Machining group | N (non-ferrous metals) | |
| Cutting media, manufacturer’s designation | GH1 | |
| Coating | uncoated | |
| Grade | GH1 | |
| Insert thickness T | 5 mm | |
| Type of fastening for insert | S (with counterbore screwed through hole) | |
| Interface coding for insert | ZDET 16M5 | |
| Interface coding for insert according to ISO TS 13399-60 | ZD16M5__3R | |
| Insert designation | ZDET 16M512 FR-721 | |
| Type of product | cutter insert | |
| With ISO code | yes | |
| Number of teeth | 2 pcs. | |
| Direction of action | right-hand | |
| Suitable for material | aluminium; non-ferrous materials (N) | |
| Tolerance Class | E | |
| Machining method | shoulder milling (FEC) | |
| Finishing / roughing assignment | finishing; roughing | |
| Type of fastening | hole | |
| Chip breaker | yes | |
| Number of potential uses | 2 pcs. | |
| Weight | 10 g | |
| Content | single part | |
| Correction factor fz | 2.5 |
Packaging units
| 1 Carton | 5 pieces |
Identification & Classification
| Article number | 497683 | |
| Catalog number | 220816 | |
| EAN / GTIN | 4059782504240 | |
| Manufacturer number | 5661037 | |
| Article class | 28E | |
| Manufacturer/responsible person | Kennametal Deutschland GmbH, Raiffeisenstraße 10, 61191 Rosbach vor der Höhe, Germany, www.kennametal.com |
Application Table
N
1640
N
1370
N
1095
Description
Recommendation:
When exchanging the indexable inserts, please also replace the screws. Spare screws are supplied with the indexable inserts.
Note:
fz for ae = 0.3×D.