{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
High feed rate milling cutter for indexable inserts XD..
Article no.: 497737
Catalog no.: 221903
Article code:
Product details
Technical Data
| Through-coolant | yes | |
| Entry of cooling lubricant | with cooling lubricant entry, axially concentric | |
| Escape of cooling lubricant | with cooling lubricant exit, axially angled | |
| Cooling lubricant | yes | |
| Interface position | on the machine | |
| Holder type | Plain shank | |
| Holder version | metric | |
| Holder size, metric | 0250 mm | |
| Holder tolerance class | h6 | |
| Shank diameter | 25 mm | |
| Shank length | 40 mm | |
| Shank type | HB | |
| Cutter diameter min. | 25 mm | |
| Neck diameter | 10 mm | |
| Max. cutting edge length | 1.5 mm | |
| Setting angle | 13 degrees | |
| Relief angle | 5 degrees | |
| Plunge angle max. | 1.55 degrees | |
| Ramp distance | 9.3 mm | |
| Number of cutters peripheral side | 2 | |
| Number of indexable inserts | 4; 2 | |
| Shank type | Weldon shank | |
| Diameter of shaft | 25 mm | |
| Interface | joint 1 | |
| Gauge length | 40 mm | |
| Overall length | 96 mm | |
| Cutting direction | right-hand cutting | |
| Machining method | Copy milling; circular milling (round milling); countersinking (plunge milling) | |
| Machining strategy | HPC | |
| Type of product | Profile router bit | |
| Content | single part |
Identification & Classification
| Article number | 497737 | |
| Catalog number | 221903 | |
| EAN / GTIN | 4059782504912 | |
| Manufacturer number | 5657893 | |
| Manufacturer/responsible person | Kennametal Deutschland GmbH, Raiffeisenstraße 10, 61191 Rosbach vor der Höhe, Germany, www.kennametal.com |
Description
Description:
The unique design of the indexable inserts together with their approach angle in the milling body greatly reduces the radial forces and diverts them into the axial direction. Particularly thick indexable inserts with 4 cutting edges for the heaviest duties and high cost-effectiveness. The tool has particular advantages for face milling and milling deep pockets. With its ground wiper chamfer it is equally well suited also to plunge milling and finish milling operations.