{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Indexable insert for milling X.LT...ER-D721, for high feed rate indexable face mills, GH2
Article no.: 497771
Catalog no.: 221920
Article code:
Product details
Technical Data
| Wet minimum | suitable only under restricted conditions | |
| Max. cutting depth ap | 1.5 mm; 1.5 mm | |
| Wet maximum | suitable | |
| Air | suitable only under restricted conditions | |
| Cooling lubricant | yes | |
| Manufacturer’s designation | 7792VXD IC09 INSERT | |
| Base form | base profile X | |
| Thickness of insert S | 4.76 mm | |
| Insert version | right-hand | |
| Height of cutting edge | 4.76 mm | |
| Diameter of insert d | 9.52 mm | |
| Corner radius R | 0.8 mm | |
| Normal clearance angle (main cutting edge) | 15 degrees | |
| ISO-Code | XDLT090408-ER-D721 | |
| Insert size L | 9 mm | |
| Cutting depth ap, min. | 0.05 mm | |
| Cutting depth in use | Full slot milling; Side milling | |
| Feed rate per tooth min. fz | 0.2 mm | |
| Feed rate per tooth max. fz | 1.5 mm | |
| Tool material | Carbide | |
| Machining group | N (non-ferrous metals) | |
| Cutting media, manufacturer’s designation | GH2 | |
| Grade | GH2 | |
| Insert thickness T | 4.76 mm | |
| Type of fastening for insert | S (with counterbore screwed through hole) | |
| Interface coding for insert | XD0904__3R | |
| Interface coding for insert according to ISO TS 13399-60 | XD0904__3R | |
| Insert designation | XDLT090408-ER-D721 | |
| Type of product | cutter insert | |
| With ISO code | yes | |
| Number of teeth | 4 pcs. | |
| Direction of action | right-hand | |
| Suitable for material | aluminium | |
| Tolerance Class | L | |
| Type of fastening | hole | |
| Cutter version | rounded (E) | |
| Number of potential uses | 4 pcs. | |
| Content | single part | |
| Correction factor fz | 2.5 |
Packaging units
| 1 Carton | 10 pieces |
Identification & Classification
| Article number | 497771 | |
| Catalog number | 221920 | |
| EAN / GTIN | 4059782505803 | |
| Manufacturer number | 5655472 | |
| Article class | 28E | |
| Manufacturer/responsible person | Kennametal Deutschland GmbH, Raiffeisenstraße 10, 61191 Rosbach vor der Höhe, Germany, www.kennametal.com |
Application Table
N
800
N
600
Description
Version:
Particularly thick indexable inserts with ground wiper chamfer.
Note:
Standard application values for ae = 0.3×D.
Downloads & documents
Suitable products
Services & product advisors
More search terms & categories
Tool material:
Carbide
Type of product:
cutter insert
Category:
Indexable inserts for longitudinal turning tools & face turning tools
Category:
Indexable inserts for grooving tools
Category:
Indexable inserts for side milling cutters & parting off milling cutters
Category:
Indexable inserts for high feed rate milling cutter
Brand:
KENNAMETAL®