{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Indexable insert for milling X.LT...ER-D411, for high feed rate indexable face mills, X500
Article no.: 497781
Catalog no.: 221930
Article code:
Product details
Technical Data
| Wet minimum | suitable only under restricted conditions | |
| Wet maximum | suitable | |
| Dry machining | suitable | |
| Air | suitable | |
| Cooling lubricant | yes | |
| Manufacturer’s designation | 7792VXD IC09 INSERT X-GRADE | |
| Base form | base profile X | |
| Thickness of insert S | 4.76 mm | |
| Insert version | right-hand | |
| Height of cutting edge | 4.76 mm | |
| Diameter of insert d | 9.52 mm | |
| Corner radius R | 1.2 mm | |
| Normal clearance angle (main cutting edge) | 15 degrees | |
| ISO-Code | XDLT090412-ER-D411 | |
| Cutting depth ap, min. | 0.15 mm | |
| Min. feed rate fz | 0.3 mm | |
| Max. feed rate fz | 1.4 mm | |
| Tool material | Carbide | |
| Cutting media, manufacturer’s designation | X500 | |
| Coating | CVD | |
| Grade | X500 | |
| Insert thickness T | 4.76 mm | |
| Type of fastening for insert | S (with counterbore screwed through hole) | |
| Insert designation | XDLT090412-ER-D411 | |
| Type of product | cutter insert | |
| With ISO code | yes | |
| Number of teeth | 4 pcs. | |
| Direction of action | right-hand | |
| Tolerance Class | L | |
| Type of fastening | hole | |
| Chip breaker | yes | |
| Cutter version | rounded (E) | |
| Number of potential uses | 4 pcs. | |
| Weight | 3 g | |
| Content | single part | |
| Correction factor fz | 2.5 |
Packaging units
| 1 Carton | 10 pieces |
Identification & Classification
| Article number | 497781 | |
| Catalog number | 221930 | |
| EAN / GTIN | 4059782505865 | |
| Manufacturer number | 5655172 | |
| Article class | 28F | |
| Manufacturer/responsible person | Kennametal Deutschland GmbH, Raiffeisenstraße 10, 61191 Rosbach vor der Höhe, Germany, www.kennametal.com |
Application Table
P
230
P
180
P
140
M
200
M
170
S
60
Description
Version:
Particularly thick indexable inserts with ground wiper chamfer.
Note:
Standard application values for ae = 0.3×D.
Downloads & documents
Suitable products
Services & product advisors
More search terms & categories
Tool material:
Carbide
Coating:
CVD
Type of product:
cutter insert
Category:
Indexable inserts for longitudinal turning tools & face turning tools
Category:
Indexable inserts for grooving tools
Category:
Indexable inserts for side milling cutters & parting off milling cutters
Category:
Indexable inserts for high feed rate milling cutter
Brand:
KENNAMETAL®