{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Indexable insert for milling X.L...SR-D, for high feed rate indexable face mills, SC3025
Article no.: 497785
Catalog no.: 221933
Article code:
Product details
Technical Data
| Cooling lubricant | yes | |
| Wet minimum | suitable | |
| Wet maximum | suitable | |
| Manufacturer’s designation | X.L...SR-D | |
| Dry machining | suitable | |
| Oil | suitable | |
| Air | suitable | |
| Base form | square | |
| Insert width | 11.33 mm | |
| Blade thickness | 5.56 mm | |
| Insert length | 11.33 mm | |
| Insert version | neutral | |
| Cutting edge length | 11.33 mm | |
| Cutting edge height | 5.56 mm | |
| Insert diameter | 12.7 mm | |
| Corner radius | 0.8 mm | |
| Rake angle | 0 degrees | |
| Normal clearance angle (auxiliary cutting edge) | 0 degrees | |
| Angle of main cutting edge, right | 15 degrees | |
| ISO-Code | XDLW120508-SR-D | |
| Type of chip breaker | GG | |
| Tool material | Carbide | |
| Cutting media, manufacturer’s designation | SC3025 | |
| Coating | CVD | |
| Grade | SC3025 | |
| Type of product | Cutter insert | |
| With ISO code | yes | |
| Standard | DIN ISO 1832 | |
| Number of teeth | 4 pcs. | |
| Direction of action | neutral | |
| Suitable for material | stainless steel (M); steel (P) | |
| Machining method | face milling (FPL) | |
| Finishing / roughing assignment | Roughing | |
| Type of fastening | Hole | |
| Chip breaker | yes | |
| Cutter version | chamfered (T) | |
| Cutting conditions | interrupted | |
| Number of potential uses | 4 pcs. | |
| Weight | 9 g | |
| Content | 1 pcs. | |
| Correction factor fz | 2.5 |
Identification & Classification
| Article number | 497785 | |
| Catalog number | 221933 | |
| EAN / GTIN | 4059782505711 | |
| Manufacturer number | 5656214 | |
| Manufacturer/responsible person | Kennametal Deutschland GmbH, Raiffeisenstraße 10, 61191 Rosbach vor der Höhe, Germany, www.kennametal.com |
Application Table
K
260
Description
Version:
Particularly thick indexable inserts with ground wiper chamfer.
Note:
Standard application values for ae = 0.3×D.