{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Indexable insert for turning CNGA 120408, CBN (0°)
Article no.: 498532
Catalog no.: 255616
Article code:
Product details
Technical Data
| Manufacturer’s designation | CNGA120408S01730MET KBN25M | |
| Base form | rhombic | |
| Thickness of insert S | 4.76 mm | |
| Insert version | neutral | |
| Length of cutting edge l | 12.9 mm | |
| Height of cutting edge | 4.76 mm | |
| Diameter of insert d | 12.7 mm | |
| Corner radius R | 0.8 mm | |
| Corner angle | 80 degrees | |
| Normal clearance angle (main cutting edge) | 0 degrees | |
| ISO-Code | CNGA 120408 | |
| Cutting depth, recommended working area, min. | 0.1 mm | |
| Cutting depth, recommended working area, max. ap max | 0.3 mm | |
| Cutting depth ap, min. | 0.1 mm | |
| Cutting depth ap, max. | 0.3 mm | |
| Cutting speed, main application, min. | 100 m/min | |
| Cutting speed, main application, max. | 180 m/min | |
| Min. feed rate fz | 0.1 mm/rev. | |
| Max. feed rate fz | 0.2 mm/rev. | |
| Tool material | BN | |
| Machining group | H (hard materials) | |
| Cutting media, manufacturer’s designation | KBN25M | |
| Coating | MEGACOAT | |
| Grade | KBN25M | |
| Insert thickness T | 4.76 mm | |
| Insert designation | CNGA 120408 | |
| Type of product | cutter insert | |
| With ISO code | yes | |
| Number of teeth | 2 pcs. | |
| Direction of action | neutral | |
| Suitable for material | hardened steel (H) | |
| Tolerance Class | G | |
| Finishing / roughing assignment | finishing | |
| Type of fastening | hole | |
| Chip breaker | no | |
| Cutter version | chamfered (T) | |
| Cutting conditions | interrupted | |
| Weight | 10 g | |
| Content | 1 pcs. | |
| Content | single part |
Identification & Classification
| Article number | 498532 | |
| Catalog number | 255616 | |
| EAN / GTIN | 4960664507108 | |
| Manufacturer number | TBZ01461 | |
| Article class | 25H | |
| Manufacturer/responsible person | KYOCERA UNIMERCO Tooling GmbH, Hammfelddamm 6, 41460 Neuss, Germany, www.kyocera-unimerco.de |
Application Table
H
H
H
Description
Version:
MultiEdge Tough; 2 or 3 cutting edges per insert, with special honing for optimisation in interrupted cutting.