{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Indexable insert for turning VNGA 160404, CBN (0°)
Article no.: 498592
Catalog no.: 255678
Article code:
Product details
Technical Data
| Cooling lubricant | yes | |
| Wet minimum | suitable | |
| Wet maximum | suitable | |
| Manufacturer’s designation | VNGA 160404 | |
| Dry machining | suitable | |
| Oil | suitable | |
| Air | suitable | |
| Base form | rhombic | |
| Insert width | 9.525 mm | |
| Blade thickness | 4.76 mm | |
| Insert length | 16.606 mm | |
| Insert version | neutral | |
| Cutting edge length | 16.6 mm | |
| Insert diameter | 9.525 mm | |
| Corner radius | 0.4 mm | |
| Corner angle | 35 degrees | |
| Normal clearance angle (main cutting edge) | 0 degrees | |
| ISO-Code | VNGA 160404 | |
| Tool material | BN | |
| Machining group | H (hard materials) | |
| Tool application group | H01 | |
| Cutting media, manufacturer’s designation | KBN25M | |
| Coating | MEGACOAT | |
| Grade | KBN25M | |
| Insert thickness | 4.76 mm | |
| Type of fastening for insert | C (without hole clamped from above) | |
| Interface coding for insert | VN1604042N | |
| Interface coding for insert according to ISO TS 13399-60 | VN1604042N | |
| Insert designation | VNGA 160404 | |
| Type of product | Cutter insert | |
| With ISO code | yes | |
| Standard | DIN ISO 1832 | |
| Number of teeth | 2 pcs. | |
| Direction of action | neutral | |
| Suitable for material | hardened steel (H) | |
| Tolerance Class | G | |
| Machining method | grooving and parting off (EEA) | |
| Finishing / roughing assignment | Finishing | |
| Type of fastening | clamping | |
| Chip breaker | no | |
| Cutter version | sharp-edged (F) | |
| Cutting conditions | continuous | |
| Number of potential uses | 2 pcs. | |
| Weight | 10 g | |
| Content | 1 pcs. |
Identification & Classification
| Article number | 498592 | |
| Catalog number | 255678 | |
| EAN / GTIN | 4960664507726 | |
| Manufacturer number | TBZ06007 | |
| Manufacturer/responsible person | KYOCERA UNIMERCO Tooling GmbH, Hammfelddamm 6, 41460 Neuss, Germany, www.kyocera-unimerco.de |
Application Table
H
H
H
Description
Version:
MultiEdge; 2 or 3 cutting edges per insert.