{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Indexable insert for turning SNMG 120404, for finish machining
Article no.: 499005
Catalog no.: 251162
Article code:
Product details
Technical Data
| Base form | square | |
| Thickness of insert S | 4.76 mm | |
| Length of insert L | 12.7 mm | |
| Insert version | neutral | |
| Length of cutting edge l | 12.7 mm | |
| Height of cutting edge | 4.76 mm | |
| Diameter of insert d | 12.7 mm | |
| Corner radius R | 0.4 mm | |
| Corner angle | 90 degrees | |
| Rake angle | 15 degrees | |
| Normal clearance angle (main cutting edge) | 0 degrees | |
| Normal clearance angle (auxiliary cutting edge) | 0 degrees | |
| ISO-Code | SNMG 120404 | |
| Attachment hole diameter | 5.16 mm | |
| Type of chip breaker | MQ | |
| Schnitttiefe empfohlener Arbeitsbereich, min. | 0.5 mm | |
| Max. cutting depth ap max | 2 mm | |
| Schnitttiefe ap, min. | 0.25 mm | |
| Schnitttiefe ap, max. | 4.25 mm | |
| Schnittgeschwindigkeit Hauptanwendung, min. | 60 m/min | |
| Schnittgeschwindigkeit Hauptanwendung, max. | 220 m/min | |
| Vorschub, min. fz | 0.05 mm/rev. | |
| Vorschub, max. fz | 0.25 mm/rev. | |
| Tool material | HC-M20 | |
| Machining group, manufacturer-specific | M20 | |
| Machining group | M (stainless steel) | |
| Cutting media, manufacturer’s designation | CA6525 | |
| Coating | CVD | |
| Grade | CA6525 | |
| Insert thickness T | 4.76 mm | |
| Type of product | cutter insert | |
| With ISO code | yes | |
| Number of teeth | 4 pcs. | |
| Direction of action | neutral | |
| Suitable for material | stainless steel (M) | |
| Tolerance Class | M | |
| Finishing / roughing assignment | finishing | |
| Type of fastening | hole | |
| Chip breaker | yes | |
| Cutter version | rounded (E) | |
| Cutting conditions | interrupted | |
| Number of potential uses | 8 pcs. | |
| Weight | 10 g | |
| Content | single part |
Identification & Classification
| Article number | 499005 | |
| Catalog number | 251162 | |
| EAN / GTIN | 4960664513161 | |
| Manufacturer number | TJV05226 | |
| Article class | 25E | |
| Manufacturer/responsible person | KYOCERA UNIMERCO Tooling GmbH, Hammfelddamm 6, 41460 Neuss, Germany, www.kyocera-unimerco.de |
Application Table
M
M
