{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Indexable insert for turning WN.G 080408, for medium machining
Article no.: 499192
Catalog no.: 252114
Article code:
Product details
Technical Data
| Through-coolant | no | |
| Entry of cooling lubricant | without cooling lubricant entry | |
| Escape of cooling lubricant | without cooling lubricant exit | |
| Cooling lubricant | yes | |
| Wet minimum | suitable | |
| Wet maximum | suitable | |
| Dry machining | suitable only under restricted conditions | |
| Oil | suitable | |
| Air | suitable only under restricted conditions | |
| Base form | triangular | |
| Wide insert B | 8,7 mm | |
| Thickness of the insert S | 4,76 mm | |
| Length of cutting insert L | 8,7 mm | |
| Insert version | neutral | |
| Length of cutting edge l | 8,7 mm | |
| Height of cutting edge | 4,76 mm | |
| Diameter of the cutting insert d | 12,7 mm | |
| Corner radius R | 0,8 mm | |
| Corner angle | 80 degrees | |
| Rake angle | 15 degrees | |
| Normal clearance angle (main cutting edge) | 0 degrees | |
| Normal clearance angle (auxiliary cutting edge) | 0 degrees | |
| Cutting conditions | continuous | |
| ISO-Code | WNMG080408 | |
| Attachment hole diameter | 5,16 mm | |
| Type of chip breaker | MS | |
| Tool material | HC-M25 | |
| Machining group, manufacturer-specific | M25,S25 | |
| Machining group | M (stainless steel); S (difficult-to-machine materials) | |
| Cutting media, manufacturer’s designation | CA6525 | |
| Coating | TiCN | |
| Grade | CA6525 | |
| Insert thickness T | 4,76 mm | |
| Type of fastening for insert | S (with counterbore screwed through hole) | |
| Interface coding for insert | WN0804082N | |
| Interface coding for insert according to ISO TS 13399-60 | WNMG080408 | |
| Insert designation | WNMG080408 | |
| Type of product | Cutter insert | |
| With ISO code | yes | |
| Standard | DIN ISO 1832 | |
| Number of teeth | 6 pcs. | |
| Direction of action | neutral | |
| Suitable for material | heat-resistant super-alloys (S); stainless steel (M) | |
| Tolerance Class | M | |
| Finishing / roughing assignment | Finishing; Roughing | |
| Type of fastening | Hole | |
| Chip breaker | yes | |
| Cutter version | rounded (E) | |
| Cutting conditions | interrupted | |
| Number of potential uses | 6 pcs. | |
| Weight | 10 g | |
| Content | 10 pcs. |
Identification & Classification
| Article number | 499192 | |
| Catalog number | 252114 | |
| EAN / GTIN | 4960664472338 | |
| Manufacturer number | TJV08632 | |
| Manufacturer/responsible person | KYOCERA UNIMERCO Tooling GmbH, Hammfelddamm 6, 41460 Neuss, Germany, www.kyocera-unimerco.de |
Application Table
M
M
