{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Indexable insert for turning DC.T 11T302, for finish machining
Article no.: 499381
Catalog no.: 260385
Article code:
Product details
Technical Data
| Cooling lubricant | yes | |
| Wet minimum | suitable | |
| Wet maximum | suitable | |
| Manufacturer’s designation | DC.T 11T302 | |
| Dry machining | suitable | |
| Oil | suitable | |
| Air | suitable only under restricted conditions | |
| Base form | rhombic | |
| Thickness of the insert S | 3,97 mm | |
| Length of cutting insert L | 11,6 mm | |
| Insert version | neutral | |
| Length of cutting edge l | 11,6 mm | |
| Diameter of the cutting insert d | 9,525 mm | |
| Corner radius R | 0,2 mm | |
| Corner angle | 55 degrees | |
| Rake face chamfer width C | 0 mm | |
| Rake face chamfer angle | 0 degrees | |
| Rake angle | 0 degrees | |
| Normal clearance angle (main cutting edge) | 7 degrees | |
| Normal clearance angle (auxiliary cutting edge) | 0 degrees | |
| Normal clearance angle (flat cutting edge) | 0 degrees | |
| ISO-Code | DCMT11T302 | |
| Attachment hole diameter | 4,7 mm | |
| Type of chip breaker | MQ | |
| Tool material | Carbide | |
| Standard designation for cutting medium, 2nd Priority | HC-S20 | |
| Machining group, manufacturer-specific | HC-M25 | |
| Tool application group | M25 | |
| Cutting media, manufacturer’s designation | CA6525 | |
| Coating | TiCn-Al2O3 | |
| Grade | CA6525 | |
| Insert thickness T | 3,97 mm | |
| Type of fastening for insert | S (with counterbore screwed through hole) | |
| Interface coding for insert | DC11T3023N | |
| Interface coding for insert according to ISO TS 13399-60 | DCMT11T302 | |
| Insert designation | DCMT11T302 | |
| Type of product | Cutter insert | |
| With ISO code | yes | |
| Number of teeth | 4 pcs. | |
| Direction of action | neutral | |
| Suitable for material | heat-resistant super-alloys (S); stainless steel (M) | |
| Tolerance Class | M | |
| Type of fastening | Hole | |
| Chip breaker | yes | |
| Cutter version | rounded (E) | |
| Cutting conditions | interrupted | |
| Number of potential uses | 2 pcs. | |
| Weight | 5 g | |
| Content | 1 pcs. |
Identification & Classification
| Article number | 499381 | |
| Catalog number | 260385 | |
| EAN / GTIN | 4960664589241 | |
| Manufacturer number | TJV01896 | |
| Manufacturer/responsible person | KYOCERA UNIMERCO Tooling GmbH, Hammfelddamm 6, 41460 Neuss, Germany, www.kyocera-unimerco.de |
Application Table
M
M
