{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
End milling head, radius = 1.0 mm, HB730, ⌀ D h10: 12mm
Article no.: 501843
Catalog no.: 210230
Article code:
Product details
Technical Data
| Through-coolant | no | |
| Entry of cooling lubricant | without cooling lubricant entry | |
| Escape of cooling lubricant | without cooling lubricant exit | |
| Wet minimum | suitable only under restricted conditions | |
| Max. cutting depth, Side milling | 9 mm | |
| Wet maximum | suitable | |
| Eingriffsbreite max. ae | 1×D bei Vollnuten, 0,3×D bei Besäumen | |
| Interface position | on the machine | |
| Holder type | screw holder | |
| Dry machining | suitable only under restricted conditions | |
| Arbor size | 12 | |
| Oil | suitable only under restricted conditions | |
| Air | suitable | |
| Cooling lubricant | yes | |
| Series | TopCut | |
| Tool material | solid carbide | |
| Machining group | H (hard materials); K (cast iron); M (stainless steel); P (steel); S (difficult-to-machine materials) | |
| Tool application group | N | |
| Cutting media, manufacturer’s designation | HB730 | |
| Grade | HB730 | |
| Interface | joint 1 | |
| Overall length L | 30.1 mm | |
| Weight | 26 g | |
| Cutting direction | right-hand cutting | |
| Tool version | solid carbide | |
| Standard | Werksnorm | |
| Cutter diameter D1 | 12 mm | |
| Tolerance class | h10 | |
| Cutting edge length L1 | 9 mm | |
| Head length L | 16 mm | |
| Number of effective cutters (peripheral side) | 4 | |
| Number of effective cutters (end face) | 4 | |
| Twist direction | right-hand | |
| Helix angle | 40 degrees | |
| Machining method | shoulder milling (FEC); slot milling (FNU) | |
| Number of corner versions | 4 | |
| Corner version | as radius | |
| Corner radius | 1 mm | |
| Direction of infeed | horizontal; vertical | |
| Content | single part | |
| Correction factor fz | 1.25 | |
| Cutting depth min. | 0.01 mm | |
| Cutting depth in use | Full slot milling; Side milling | |
| Type of product | end / face mill |
Identification & Classification
| Article number | 501843 | |
| Catalog number | 210230 | |
| EAN / GTIN | 4045197522979 | |
| Manufacturer number | 210230 12 | |
| Article class | 21M | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Application Table
P
210
P
170
P
150
P
130
P
110
H
50
H
40
M
80
M
50
S
80
K
160
Description
Note:
Standard application values for ap max ≤ 0.5×D.