{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. Nr.:
Plunge milling cutter 93°, with threaded shank, ⌀ D / number of teeth Z: 32/2mm
Article no.: 501931
Catalog no.: 211813
Article code:
- Setting angle κ: 93
- Milling application: Circular milling; Ramping
- Through-coolant: yes
- Machining strategy: MTC
- Tool exchange: PowerCard
Product details
Technical Data
| Cutting edge ⌀ DC | 32 mm | |
| Number of cutting edges Z | 2 | |
| Shank type | with threaded shank | |
| Setting angle κ | 93 degrees | |
| Milling application | Circular milling; Ramping | |
| Through-coolant | yes | |
| Machining strategy | MTC | |
| Tool exchange | PowerCard | |
| ⌀ D3 | 26 mm | |
| ⌀ D1 h6 | 17 mm | |
| ⌀ D2 | 29 mm | |
| Overall length Ltot | 47 mm | |
| Mounting thread M | M16 | |
| Circular interpolation milling ⌀ Dmin | 58 mm | |
| Circular interpolation milling ⌀ Dmax | 62 mm | |
| Circular interpolation milling ap | 4 mm | |
| Ramping angle αmax | 7.65 degrees | |
| Ramping length L for αmax | 22.34 mm | |
| suitable indexable insert | VCG. 2205 | |
| Set of insert screws | 219800 (20IP; 5.7 Nm) | |
| Type of product | Plunge mill |
Identification & Classification
| Article number | 501931 | |
| Catalog number | 211813 | |
| EAN / GTIN | 4045197502100 | |
| Manufacturer number | 211813 32/2 | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Description
Version:
Greater tool stiffness by elimination of twist between indexable insert and insert seat.
Can be extended as required using the threaded connection.
Can be extended as required using the threaded connection.
Application:
To prevent chips jamming, especially when milling deep pockets.