{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Indexable insert for turning VBMT 110308, for finish machining
Article no.: 504974
Catalog no.: 261176
Article code:
Product details
Technical Data
| Cooling lubricant | yes | |
| Wet minimum | suitable | |
| Wet maximum | suitable | |
| Dry machining | suitable only under restricted conditions | |
| Oil | suitable | |
| Air | suitable only under restricted conditions | |
| Base form | rhombic | |
| Wide insert B | 5.52 mm | |
| Thickness of the insert S | 3.18 mm | |
| Length of cutting insert L | 5.52 mm | |
| Insert version | neutral | |
| Length of cutting edge l | 11.1 mm | |
| Height of cutting edge | 3.18 mm | |
| Diameter of the cutting insert d | 6.35 mm | |
| Corner radius R | 0.8 mm | |
| Corner angle | 35 degrees | |
| Rake face chamfer width C | 0 mm | |
| Rake face chamfer angle | 0 degrees | |
| Rake angle | 5 degrees | |
| Setting angle | 0 degrees | |
| Normal clearance angle (main cutting edge) | 5 degrees | |
| Normal clearance angle (auxiliary cutting edge) | 0 degrees | |
| Normal clearance angle (flat cutting edge) | 0 degrees | |
| ISO-Code | VBMT 110308 | |
| Attachment hole diameter | 2.8 mm | |
| Type of chip breaker | HQ | |
| Standard designation for cutting medium, 2nd Priority | HC-S20 | |
| Machining group, manufacturer-specific | HOG | |
| Machining group | M (stainless steel) | |
| Cutting media, manufacturer’s designation | CA6525 | |
| Grade | CA6525 | |
| Type of fastening for insert | S (with counterbore screwed through hole) | |
| Interface coding for insert | VB1104083N | |
| Interface coding for insert according to ISO TS 13399-60 | VB1104083N | |
| Insert designation | VBMT110308 | |
| Type of product | Cutter insert | |
| With ISO code | yes | |
| Standard | DIN ISO 1832 | |
| Number of teeth | 2 pcs. | |
| Direction of action | neutral | |
| Suitable for material | stainless steel (M) | |
| Tolerance Class | M | |
| Finishing / roughing assignment | Finishing | |
| Type of fastening | Hole | |
| Chip breaker | yes | |
| Cutter version | rounded (E) | |
| Cutting conditions | interrupted | |
| Number of potential uses | 2 pcs. | |
| Weight | 3 g | |
| Content | 1 pcs. |
Identification & Classification
| Article number | 504974 | |
| Catalog number | 261176 | |
| EAN / GTIN | 4960664492343 | |
| Manufacturer number | TJV07411 | |
| Manufacturer/responsible person | KYOCERA UNIMERCO Tooling GmbH, Hammfelddamm 6, 41460 Neuss, Germany, www.kyocera-unimerco.de |
Application Table
M
M
