Coltogum Extreme Construction white 290ml

The 1K SMP adhesive operates at the limit of highly elastic bonding and also withstands extreme stress caused by mechanical influences.

Enormous initial and final adhesion for demanding applications
Adheres perfectly, without primer, to most substrates
Balances unevenness and equalises tension
Pressure- and sound-absorbing / vibration-inhibiting
Suitable for bonding, mounting, jointing and sealing
Certified food testing by ISEGA
Isocyanate-, solvent- and silicone-free
UV- and weather-resistant

The adhesive is suitable for permanently bonding glass, mirrors, wood, stone, brick, concrete, plaster, metals, plastics (except PE, PP, Teflon, bitumen, etc.), usually without priming. Its exceptional adhesion spectrum also allows it to be applied to damp substrates. Suitable for permanent, dynamic load-bearing bonding in the entire wood, construction and metal industry, e.g. façade and ceiling constructions, car body construction, lightweight construction, air conditioning and insulation technology. Due to its sealing properties, Extreme can also be used as a tested sealant for reinforcement joints in door and window construction as well as on facades, pavements and sanitary areas. Not suitable for natural stone, please check our Coltogum® Strong Power.

Only apply to clean, grease-free and stable surfaces.
Apply adhesive beads in parallel and vertically if possible. The parts to be joined must be appropriately fixed, clamped or clamped until completely dry.

Always observe the technical data sheet.