{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Electrician’s screwdriver for slot-head, reduced blade ⌀, with Kraftform handle VDE fully insulated, Blade width b: 3,5mm
Article no.: 514464
Catalog no.: 663200
Article code:
Click to enlarge image
Click to enlarge image
Insulation ⌀ matches the blade ⌀ for optimum access e.g. for spring terminals.
Click to enlarge image
Click to enlarge image
Click to enlarge image
Click to enlarge image
Click to enlarge image
Click to enlarge image
Click to enlarge image
Click to enlarge image
Click to enlarge image
Click to enlarge image
Click to enlarge image
Click to enlarge image
Click to enlarge image
Offers
Product details
Technical Data
| Tested up to | 1’000 V | |
| Colour, red | Signal yellow; Signal red; Jet black | |
| Manufacturer’s designation | 160 iS | |
| Quality and test seal | VDE | |
| Guideline / labelling | CE mark; low-voltage Directive | |
| Colour | yellow; red; black | |
| Version | straight | |
| Suitable for voltage testing | no | |
| Blade length | 100 mm | |
| Handle properties | ergonomic; non-slip | |
| Type of handle | standard handle | |
| Non-roll flats | yes | |
| Size of drive output, for slotted screws (SL) | 3,5 | |
| Special features, for slotted screws (SL) | with plastic sleeve | |
| Blade height | 0.6 mm | |
| Blade width | 3.5 mm | |
| Type of product | screwdriver | |
| Material | special steel / special alloy | |
| Surface | phosphated | |
| Standard | DIN EN 60900; VDE 0682-201 | |
| Overall length | 181 mm | |
| Set | no | |
| Drive | handle | |
| Output drive | for slotted screws (SL) | |
| Content | single part |
Identification & Classification
| Article number | 514464 | |
| Catalog number | 663200 | |
| EAN / GTIN | 4013288160089 | |
| Manufacturer number | 05006440001 | |
| Manufacturer/responsible person | Wera Werkzeuge GmbH, Korzerter Straße 21-25, 42349 Wuppertal, Germany, www.wera.de |
Description
Version:
Handle and blade fully insulated up to 1000 V to DIN EN IEC 60900 / VDE 0682-201.
Each of these screwdrivers is individually tested in a water bath for insulation breakdown under high voltage.
Blades with taper tips, manufactured to the standard dimensions of slots on the screws. Fully insulated, the breakdown strength of the insulation is many times the minimum test voltage set by VDE. Each of these screwdrivers is individually tested in a water bath for insulation breakdown under high voltage.
Kraftform handle made of impact resistant plastic with integral soft zones facilitates torque transmission and thus protects hand and arm.
Blade made of high-alloy special steel with taper tip, zinc phosphated. Reduced blade ⌀ with integral protective insulation for deep-lying screws of spring elements (blade ⌀ = insulation ⌀ near the tip of the blade).
Each of these screwdrivers is individually tested in a water bath for insulation breakdown under high voltage.
Blades with taper tips, manufactured to the standard dimensions of slots on the screws. Fully insulated, the breakdown strength of the insulation is many times the minimum test voltage set by VDE. Each of these screwdrivers is individually tested in a water bath for insulation breakdown under high voltage.
Kraftform handle made of impact resistant plastic with integral soft zones facilitates torque transmission and thus protects hand and arm.
Blade made of high-alloy special steel with taper tip, zinc phosphated. Reduced blade ⌀ with integral protective insulation for deep-lying screws of spring elements (blade ⌀ = insulation ⌀ near the tip of the blade).
Application:
For use at voltage up to 1000 V.
Optimum working life for electrician’s screwdrivers is assured if screwdrivers always exactly match the standard screw slot size. (see tables part). Incorrect screwdriver size selection will cause damage to the screw head.
Optimum working life for electrician’s screwdrivers is assured if screwdrivers always exactly match the standard screw slot size. (see tables part). Incorrect screwdriver size selection will cause damage to the screw head.