{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Solid carbide roughing end mill HPC, TiAlN, ⌀ d11 DC: 16mm
Article no.: 520261
Catalog no.: 205492
Article code:
Product details
Technical Data
| Through-coolant | no | |
| Entry of cooling lubricant | without cooling lubricant entry | |
| Escape of cooling lubricant | without cooling lubricant exit | |
| Wet minimum | suitable only under restricted conditions | |
| Vorschub pro Zahn Besäumen fz | 0.1 mm | |
| Max. cutting depth, Full slot milling | 24 mm | |
| Max. cutting depth, Side milling | 32 mm | |
| Wet maximum | suitable | |
| Vorschub pro Zahn Nutenfräsen fz | 0.08 mm | |
| Eingriffsbreite max. ae | 1×D; 0,5×D | |
| Interface position | on the machine | |
| Holder type | plain shank | |
| Interface coding | ZYL01601005 | |
| Holder version | metric | |
| Holder size, metric | 16 mm | |
| Dry machining | suitable only under restricted conditions | |
| Holder tolerance class | h6 | |
| Shank diameter DS | 16 mm | |
| Shank type | HB | |
| Air | suitable only under restricted conditions | |
| Cooling lubricant | yes | |
| Manufacturer’s designation | VHM-Schruppfräser HPC | |
| Tool material | solid carbide | |
| Machining group | K (cast iron); M (stainless steel); N (non-ferrous metals); P (steel) | |
| Cutter diameter Dc | 16 mm | |
| Tolerance of cutter diameter | tolerance class ISO | |
| Tolerance class | d11 | |
| Cutting edge length Lc | 32 mm | |
| Number of effective cutters (peripheral side) Z | 4 | |
| Number of effective cutters (end face) Z | 4 | |
| Twist direction | right-hand | |
| Twist angle | 30 degrees | |
| Corner / edge | 1 | |
| Corner version | as chamfer | |
| Corner chamfer width | 0.5 mm | |
| Corner chamfer angle | 45 degrees | |
| Direction of infeed | horizontal, oblique and vertical | |
| Number of clamping slots | 4 | |
| Cutting media, manufacturer’s designation | VHM TIALN | |
| Vorschub pro Zahn in | steel < 900 N/mm2 | |
| Coating | TiAlN | |
| Interface | joint 1 | |
| Overall length L | 92 mm | |
| Weight | 220.2 g | |
| Cutting direction | right-hand cutting | |
| Tool version | solid carbide | |
| Standard | DIN 6527 | |
| Machining method | shoulder milling (FEC); slot milling (FNU) | |
| Colour ring | without | |
| Machining strategy | HPC | |
| Type of product | shoulder mill | |
| Content | single part | |
| Correction factor fz | 1.25 | |
| Cutting depth min. | 0.5 mm | |
| Cutting depth in use | Full slot milling; Side milling |
Identification & Classification
| Article number | 520261 | |
| Catalog number | 205492 | |
| EAN / GTIN | 4045197546128 | |
| Manufacturer number | 205492 16 | |
| Article class | 12X | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Application Table
N
270
N
190
P
115
P
100
P
95
P
65
P
55
M
55
K
85
Description
Version:
Without dynamic twist pitch.
Size 16M MID mills: Dimensions to manufacturer’s standard.
Dimensions similar to DIN 6527.
For high feed rates, very high metal removal rate.
Size 16M MID mills: Dimensions to manufacturer’s standard.
Dimensions similar to DIN 6527.
For high feed rates, very high metal removal rate.
Note:
NEW GENERATION AVAILABLE!
Recommended successor product No. 205706.
Recommended successor product No. 205706.