{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
NC spotting drill 90°, HB730, ⌀ D ± 0.01: 10mm
Article no.: 520514
Catalog no.: 210400
Article code:
Product details
Technical Data
| Through-coolant | no | |
| Escape of cooling lubricant | without cooling lubricant exit | |
| Cooling lubricant | yes | |
| Series | TopCut | |
| Wet maximum | suitable | |
| Manufacturer’s designation | NC-Anbohrer 90° | |
| Interface position | on the machine | |
| Holder type | plain shank | |
| Holder version | metric | |
| Holder size, metric | 10 mm | |
| Dry machining | suitable only under restricted conditions | |
| Shank diameter DS | 10 mm | |
| Shank length LS | 0 mm | |
| Air | suitable | |
| Cutter diameter, min. Dc min. | 10 mm | |
| Cutter diameter, max. Dc max. | 10 mm | |
| Configurable | no | |
| Tolerance of cutter diameter | manufacturer tolerance | |
| Min. manufacturer tolerance | 0,01 mm | |
| Max. manufacturer tolerance | -0,01 mm | |
| Flute length Lc | 5 mm | |
| Number of teeth Z | 2 | |
| Angle, 1st step | 90 degrees | |
| Point geometry | N | |
| Product designation (type) | N | |
| Tool material | solid carbide | |
| Cutting media, manufacturer’s designation | HB730 | |
| Grade | HB730 | |
| Interface | joint 1 | |
| Gauge length A | 13 mm | |
| Usable length L1 | 5 mm | |
| Overall length L | 26,9 mm | |
| Weight | 11 g | |
| Cutting direction | right-hand cutting | |
| Standard | Werksnorm | |
| Machining method | drilling into solid material (BVB) | |
| Type of product | spotting drill | |
| Content | single part |
Identification & Classification
| Article number | 520514 | |
| Catalog number | 210400 | |
| EAN / GTIN | 4045197557537 | |
| Manufacturer number | 210400 10 | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Application Table
P
210
P
170
P
150
P
130
P
110
H
50
H
40
M
80
M
50
S
80
K
160
