{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Indexable insert for milling VDGT 11T210 FN, for plunge milling cutters, HB7810, diamond coated
Article no.: 520563
Catalog no.: 211864
Article code:
Product details
Technical Data
| Cooling lubricant | yes | |
| Wet minimum | suitable | |
| Wet maximum | suitable | |
| Manufacturer’s designation | VDGT 11T210 FN | |
| Dry machining | suitable only under restricted conditions | |
| Oil | suitable | |
| Air | suitable only under restricted conditions | |
| Base form | rhombic | |
| Wide insert | 10.9 mm | |
| Thickness of the insert | 2.78 mm | |
| Length of cutting insert | 10.9 mm | |
| Insert version | neutral | |
| Length of cutting edge | 10.9 mm | |
| Height of cutting edge | 2.87 mm | |
| Diameter of the cutting insert | 6.35 mm | |
| Corner radius | 1 mm | |
| Corner angle | 35 degrees | |
| Rake angle | 0 degrees | |
| Normal clearance angle (main cutting edge) | 15 degrees | |
| Normal clearance angle (auxiliary cutting edge) | 0 degrees | |
| Cutting conditions | continuous | |
| ISO-Code | VDGT 11T210 FN | |
| Tool material | Carbide | |
| Machining group | N (non-ferrous metals) | |
| Tool application group | HOG | |
| Cutting media, manufacturer’s designation | HB7810 | |
| Grade | HB7810 | |
| Insert thickness | 2.78 mm | |
| Type of fastening for insert | S (with counterbore screwed through hole) | |
| Interface coding for insert | VD11T2103N | |
| Interface coding for insert according to ISO TS 13399-60 | VD11T2103N | |
| Insert designation | VDGT 11T210 FN | |
| Type of product | Cutter insert | |
| With ISO code | yes | |
| Standard | DIN ISO 1832 | |
| Number of teeth | 2 pcs. | |
| Direction of action | neutral | |
| Suitable for material | Aluminium; non-ferrous materials (N) | |
| Tolerance Class | G | |
| Machining method | countersinking (plunge milling) (FSE) | |
| Finishing / roughing assignment | Finishing; Roughing | |
| Type of fastening | Hole | |
| Chip breaker | yes | |
| Cutter version | sharp-edged (F) | |
| Cutting conditions | continuous | |
| Weight | 2 g | |
| Content | 1 pcs. | |
| Correction factor | 2.5 |
Identification & Classification
| Article number | 520563 | |
| Catalog number | 211864 | |
| EAN / GTIN | 4045197555786 | |
| Manufacturer number | 211864 ALU | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Application Table
N
1900
N
1900
N
680
N
Description
Version:
Diamond-coated milling insert for higher cutting speeds and longer tool life in materials with silicon content.
Note:
ap max = 3 mm for roughing with ae = 1×D.