{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Indexable insert for milling RDHX 0702 MOTN, for copy and face milling cutters, HB7525
Article no.: 520574
Catalog no.: 212212
Article code:
Product details
Technical Data
| Wet minimum | suitable | |
| Max. cutting depth, Side milling | 3.5 mm | |
| Max. cutting depth, Full slot milling | 1.5 mm | |
| Wet maximum | suitable | |
| Dry machining | suitable | |
| Oil | suitable | |
| Air | suitable | |
| Cooling lubricant | yes | |
| Base form | round | |
| Thickness of insert S | 2.38 mm | |
| Insert version | neutral | |
| Diameter of insert d | 7 mm | |
| Normal clearance angle (main cutting edge) | 15 degrees | |
| ISO-Code | RDHX 0702 MOTN | |
| Cutting depth ap, min. | 0.15 mm | |
| Cutting depth in use | Full slot milling; Side milling | |
| Feed rate per tooth min. fz | 0.18 mm | |
| Feed rate per tooth max. fz | 0.18 mm | |
| Tool material | Carbide | |
| Machining group | K (cast iron); M (stainless steel); P (steel) | |
| Cutting media, manufacturer’s designation | HB7525 | |
| Coating | CVD | |
| Grade | HB7525 | |
| Insert thickness T | 2.38 mm | |
| Type of fastening for insert | S (with counterbore screwed through hole) | |
| Interface coding for insert | RDHX 0702 | |
| Insert designation | RDHX 0702 MOTN | |
| Type of product | cutter insert | |
| With ISO code | yes | |
| Number of teeth | 1 pcs. | |
| Direction of action | neutral | |
| Suitable for material | cast iron (K); stainless steel (M); steel (P) | |
| Tolerance Class | H | |
| Machining method | face milling (FPL) | |
| Type of fastening | hole | |
| Number of potential uses | 1 pcs. | |
| Weight | 1 g | |
| Content | single part | |
| Correction factor fz | 2.5 |
Packaging units
| 1 Carton | 10 pieces |
Identification & Classification
| Article number | 520574 | |
| Catalog number | 212212 | |
| EAN / GTIN | 4045197554185 | |
| Manufacturer number | 212212 ST900 | |
| Article class | 21A | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Application Table
P
380
P
290
P
240
P
210
P
170
M
240
M
170
K
200
Description
Version:
All indexable inserts are suitable for use with carriers that are 0° negative and also with carriers that are 7° positive.
Note:
Standard application values for ae = 0.3×D / apmax = 1.5 mm.