{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Indexable insert for milling SEKW 1204 AFTN, for face mills, HB7515
Article no.: 520647
Catalog no.: 214292
Article code:
Product details
Technical Data
| Wet minimum | suitable only under restricted conditions | |
| Max. cutting depth ap | 3.5 mm; 3.5 mm | |
| Wet maximum | suitable only under restricted conditions | |
| Dry machining | suitable | |
| Oil | suitable | |
| Air | suitable | |
| Cooling lubricant | yes | |
| Base form | square | |
| Thickness of insert S | 4.76 mm | |
| Insert version | neutral | |
| Length of cutting edge l | 12.7 mm | |
| Height of cutting edge | 4.76 mm | |
| Diameter of insert d | 12.7 mm | |
| Corner chamfer angle | 45 degrees | |
| Corner angle | 90 degrees | |
| Setting angle | 45 degrees | |
| Normal clearance angle (main cutting edge) | 20 degrees | |
| Normal clearance angle, main cutting edge | 20 degrees | |
| ISO-Code | SEKW 1204 AFTN | |
| Cutting depth ap, max. | 3.5 mm | |
| Cutting depth in use | Full slot milling; Side milling | |
| Feed rate per tooth min. fz | 0.19 mm | |
| Feed rate per tooth max. fz | 0.19 mm | |
| Tool material | Carbide | |
| Machining group | K (cast iron); M (stainless steel); P (steel) | |
| Cutting media, manufacturer’s designation | HB7515 | |
| Grade | HB7515 | |
| Insert thickness T | 4.76 mm | |
| Type of fastening for insert | S (with counterbore screwed through hole) | |
| Interface coding for insert | SEKW 1204 AFTN | |
| Insert designation | SEKW 1204 AFTN | |
| Type of product | cutter insert | |
| With ISO code | yes | |
| Standard | DIN ISO 1832 | |
| Number of teeth | 4 pcs. | |
| Direction of action | neutral | |
| Suitable for material | cast iron (K); stainless steel (M); steel (P) | |
| Tolerance Class | K | |
| Machining method | face milling (FPL) | |
| Type of fastening | hole | |
| Chip breaker | no | |
| Cutter version | chamfered (T) | |
| Number of potential uses | 4 pcs. | |
| Content | single part | |
| Correction factor fz | 2.5 |
Packaging units
| 1 Carton | 10 pieces |
Identification & Classification
| Article number | 520647 | |
| Catalog number | 214292 | |
| EAN / GTIN | 4045197553898 | |
| Manufacturer number | 214292 ST1400 | |
| Article class | 21A | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Application Table
P
320
P
230
P
190
P
180
P
170
M
230
M
150
K
150
Description
Note:
Standard application values for ae = 0.5 ... 1×D / ap max = 3.5 mm.