{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
High feed rate milling cutter 7792VX with thread, for indexable inserts XD..
Article no.: 520821
Catalog no.: 221905
Article code:
Product details
Technical Data
| Through-coolant | yes | |
| Interface position | on the machine | |
| Holder type | screw holder | |
| Nominal size of mounting thread | M16 | |
| Cooling lubricant | yes | |
| Series | 7792VX | |
| Interface | joint 1 | |
| Insert thickness T | 4.76 mm | |
| Type of fastening for insert | S (with counterbore screwed through hole) | |
| Insert designation | XD.. 0904 | |
| Gauge length A | 43 mm | |
| Overall length L | 43 mm | |
| Machining method | circular milling (round milling) (FZI); countersinking (plunge milling) (FSE); face milling (FPL) | |
| Cutter diameter min. D1 | 35 mm | |
| Setting angle | 13 degrees | |
| Relief angle | 5 degrees | |
| Plunge angle max. αmax | 0.74 degrees | |
| Plunge depth max. ae max | 19.3 mm | |
| Number of effective cutters (peripheral side) | 3 | |
| Number of indexable inserts | 3 | |
| Diameter of circular interpolation milling min. | 55 mm | |
| Diameter of circular interpolation milling max. | 68 mm | |
| Machining strategy | HPC | |
| Indexable insert size | 09 | |
| Content | single part | |
| Max. cutting depth L2 | 1.5 mm | |
| Type of product | copy mill | |
| Mounting thread M | M16 |
Identification & Classification
| Article number | 520821 | |
| Catalog number | 221905 | |
| EAN / GTIN | 2050001705907 | |
| Manufacturer number | UKNS079211 | |
| Article class | 28R | |
| Manufacturer/responsible person | Kennametal Deutschland GmbH, Raiffeisenstraße 10, 61191 Rosbach vor der Höhe, Germany, www.kennametal.com |
Description
Description:
The unique design of the indexable inserts together with their approach angle in the milling body greatly reduces the radial forces and diverts them into the axial direction. Particularly thick indexable inserts with 4 cutting edges for the heaviest duties and high cost-effectiveness. The tool has particular advantages for face milling and milling deep pockets. With its ground wiper chamfer it is equally well suited also to plunge milling and finish milling operations.