{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Pull stud, 18CrNiMo7 Form A, with bore, suitable for steep tapers: 40
Article no.: 523097
Catalog no.: 308605
Article code:
Product details
Technical Data
| Bore diameter | 7 mm | |
| Collar diameter | 23 mm | |
| Type of product | pull studs | |
| Thread | M16 | |
| For arbor | SK 40 | |
| Overall length | 54 mm | |
| Head diameter | 19 mm | |
| Gauge length | 26 mm | |
| Squares | 15 degrees | |
| Width across flats | 19 mm | |
| With bore | yes | |
| With collar | yes | |
| Tightening torque max. | 50 Nm |
Identification & Classification
| Article number | 523097 | |
| Catalog number | 308605 | |
| EAN / GTIN | 4045197554529 | |
| Manufacturer number | 308605 40 | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Description
Description:
The toolholder is securely pulled into the spindle by the spindle’s clamping gripper using the pull stud. Pull studs come in different versions. They are an important link between the machine and tool. Stringent requirements apply for the accuracy, strength and reliability of pull studs.
Application:
- For tools with taper shanks see also DIN 69871 and JIS B 6339 (MAS-BT).
- In machining centres (machines with automatic tool changers).
- In NC machines (machines without automatic tool changers).
Note:
When installing the pull stud, cheque the correct tightening torque.
ISO 7388-3 meets the old standard DIN 69872.
ISO 7388-3 meets the old standard DIN 69872.