{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Indexable insert for milling LOMU...08ER-GH, for indexable milling cutters, PR1525
Article no.: 528635
Catalog no.: 225227
Article code:
New product
Product details
Technical Data
| Through-coolant | no | |
| Entry of cooling lubricant | without cooling lubricant entry | |
| Escape of cooling lubricant | without cooling lubricant exit | |
| Cooling lubricant | yes | |
| Wet minimum | suitable | |
| Wet maximum | suitable | |
| Manufacturer’s designation | LOMU...08ER-GH | |
| Dry machining | suitable | |
| Oil | suitable | |
| Air | suitable | |
| Base form | square | |
| Insert width | 9.2 mm | |
| Blade thickness | 5.6 mm | |
| Insert length | 15.7 mm | |
| Insert version | neutral | |
| Cutting edge length | 15.7 mm | |
| Cutting edge height | 5.6 mm | |
| Insert diameter | 9.2 mm | |
| Corner radius | 0.8 mm | |
| Corner angle | 90 degrees | |
| Rake angle | 10 degrees | |
| Normal clearance angle (main cutting edge) | 0 degrees | |
| Normal clearance angle (auxiliary cutting edge) | 0 degrees | |
| ISO-Code | LOMU150508-ER-GH | |
| Attachment hole diameter | 4.8 mm | |
| Tool material | Carbide | |
| Machining group | K (cast iron); M (stainless steel); P (steel) | |
| Tool application group | HOG | |
| Cutting media, manufacturer’s designation | PR1525 | |
| Coating | Megacoat Nano | |
| Grade | PR1525 | |
| Insert thickness | 5.6 mm | |
| Type of fastening for insert | S (with counterbore screwed through hole) | |
| Interface coding for insert | LOMU...08ER-GH | |
| Interface coding for insert according to ISO TS 13399-60 | LOMU...08ER-GH | |
| Insert designation | LO1505083R | |
| Type of product | Cutter insert | |
| With ISO code | yes | |
| Standard | DIN ISO 1832 | |
| Number of teeth | 4 pcs. | |
| Direction of action | right-hand | |
| Suitable for material | cast iron (K); stainless steel (M); steel (P) | |
| Tolerance Class | M | |
| Machining method | shoulder milling (FEC) | |
| Finishing / roughing assignment | Finishing; Roughing | |
| Type of fastening | Hole | |
| Chip breaker | yes | |
| Cutter version | chamfered and rounded (S) | |
| Cutting conditions | continuous | |
| Number of potential uses | 4 pcs. | |
| Weight | 7 g | |
| Content | 1 pcs. | |
| Correction factor fz | 2.5 |
Identification & Classification
| Article number | 528635 | |
| Catalog number | 225227 | |
| EAN / GTIN | 4960664648931 | |
| Manufacturer number | TLB04358 | |
| Manufacturer/responsible person | KYOCERA UNIMERCO Tooling GmbH, Hammfelddamm 6, 41460 Neuss, Germany, www.kyocera-unimerco.de |
Application Table
P
200
P
180
P
160
P
140
P
140
M
160
M
150
Description
Version:
MEGACOAT-coated indexable inserts with 4 edges − due to double-sided version. The high axial rake angle up to a maximum of 10° significantly reduces the cutting force.
Note:
Standard application values for ae=0.3×D.
Downloads & documents
Suitable products
Services & product advisors
More search terms & categories
Category:
Indexable inserts for longitudinal turning tools & face turning tools
Category:
Indexable inserts for shoulder mills
Category:
Indexable inserts for side milling cutters & parting off milling cutters
Category:
Indexable inserts for grooving tools
Category:
Indexable inserts for high feed rate milling cutter
Brand:
KYOCERA