{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Indexable insert for milling LOMU...08ER-GM, for indexable milling cutters, PR1510
Article no.: 528638
Catalog no.: 225240
Article code:
New product
Product details
Technical Data
| Wet minimum | suitable only under restricted conditions | |
| Wet maximum | suitable only under restricted conditions | |
| Dry machining | suitable | |
| Air | suitable | |
| Cooling lubricant | yes | |
| Base form | rectangular | |
| Width of insert B | 6.6 mm | |
| Thickness of insert S | 4.76 mm | |
| Insert version | right-hand | |
| Length of cutting edge l | 10.9 mm | |
| Corner radius R | 0.8 mm | |
| Corner angle | 90 degrees | |
| Rake angle | 10 degrees | |
| Normal clearance angle (main cutting edge) | 0 degrees | |
| ISO-Code | LOMU100408-ER-GM | |
| Type of chip breaker | GM | |
| Cutting depth ap, min. | 0.1 mm | |
| Min. feed rate fz | 0.06 mm | |
| Max. feed rate fz | 0.25 mm | |
| Tool material | Carbide | |
| Cutting media, manufacturer’s designation | PR1510 | |
| Coating | MEGACOAT | |
| Grade | PR1510 | |
| Insert thickness T | 4.76 mm | |
| Type of fastening for insert | S (with counterbore screwed through hole) | |
| Interface coding for insert | LO1004083R | |
| Insert designation | LOMU100408-ER-GM | |
| Type of product | cutter insert | |
| With ISO code | yes | |
| Number of teeth | 4 pcs. | |
| Direction of action | right-hand | |
| Tolerance Class | M | |
| Machining method | shoulder milling (FEC) | |
| Type of fastening | hole | |
| Chip breaker | yes | |
| Cutter version | rounded (E) | |
| Number of potential uses | 4 pcs. | |
| Weight | 3 g | |
| Content | single part | |
| Correction factor fz | 2.5 |
Packaging units
| 1 Carton | 10 pieces |
Identification & Classification
| Article number | 528638 | |
| Catalog number | 225240 | |
| EAN / GTIN | 4960664648788 | |
| Manufacturer number | TLA04350 | |
| Article class | 25A | |
| Manufacturer/responsible person | KYOCERA UNIMERCO Tooling GmbH, Hammfelddamm 6, 41460 Neuss, Germany, www.kyocera-unimerco.de |
Application Table
S
50
K
180
Description
Version:
MEGACOAT-coated indexable inserts with 4 edges − due to double-sided version. The high axial rake angle up to a maximum of 10° significantly reduces the cutting force.
Note:
Standard application values for ae=0.3×D.
Downloads & documents
Suitable products
Services & product advisors
More search terms & categories
Tool material:
Carbide
Coating:
MEGACOAT
Type of product:
cutter insert
Category:
Indexable inserts for longitudinal turning tools & face turning tools
Category:
Indexable inserts for shoulder mills
Category:
Indexable inserts for grooving tools
Category:
Indexable inserts for side milling cutters & parting off milling cutters
Category:
Indexable inserts for high feed rate milling cutter
Brand:
KYOCERA