{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Indexable insert for milling WNEU 080608 EN-GL, for indexable milling cutters, PR1510
Article no.: 528668
Catalog no.: 225627
Article code:
Product details
Technical Data
| Manufacturer’s designation | WNEU 080608 EN-GL | |
| Base form | triangular, with enlarged corner angles | |
| Thickness of insert S | 6.35 mm | |
| Insert version | neutral | |
| Length of cutting edge l | 8 mm | |
| Height of cutting edge | 6.65 mm | |
| Diameter of insert d | 14.02 mm | |
| Corner radius R | 0.8 mm | |
| Corner angle | 90 degrees | |
| Rake angle | 13 degrees | |
| Normal clearance angle (main cutting edge) | 0 degrees | |
| Normal clearance angle (auxiliary cutting edge) | 0 degrees | |
| ISO-Code | WNEU 080608 EN-GL | |
| Attachment hole diameter | 6.2 mm | |
| Max. cutting depth ap max | 8 mm | |
| Schnitttiefe ap, min. | 0.15 mm | |
| Tool material | Carbide | |
| Coating | Megacoat Nano | |
| Grade | PR1510 | |
| Insert thickness T | 6.35 mm | |
| Insert designation | WNEU 080608 EN-GL | |
| Type of product | cutter insert | |
| With ISO code | yes | |
| Number of teeth | 6 pcs. | |
| Direction of action | neutral | |
| Suitable for material | cast iron (K) | |
| Tolerance Class | E | |
| Machining method | shoulder milling (FEC) | |
| Finishing / roughing assignment | finishing | |
| Type of fastening | hole | |
| Chip breaker | yes | |
| Weight | 12 g | |
| Content | single part | |
| Correction factor fz | 2.5 |
Packaging units
| 1 Carton | 10 pieces |
Identification & Classification
| Article number | 528668 | |
| Catalog number | 225627 | |
| EAN / GTIN | 4960664648870 | |
| Manufacturer number | TLA09313 | |
| Article class | 25A | |
| Manufacturer/responsible person | KYOCERA UNIMERCO Tooling GmbH, Hammfelddamm 6, 41460 Neuss, Germany, www.kyocera-unimerco.de |
Application Table
S
50
K
180
Description
Version:
MEGACOAT-coated indexable inserts with 6 edges − due to double-sided version. The high axial rake angle up to a maximum of 13° significantly reduces the cutting force.
Ground version for significantly better surface quality.
Ground version for significantly better surface quality.
Application:
The GL geometry is suitable for good surface finishes thanks to the ground version and flat cutting edge.
Note:
Standard application values for ae = 0.3×D.