{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
High-capacity anchor stainless A4 FH II 15/M12 I R
Article no.: 529722
Catalog no.: 4877
Article code:
Product details
Technical Data
| Internal thread | M12 | |
| d0 | 15 mm | |
| Number of nuts | 0 | |
| Material | Stainless steel | |
| min. anchorage depth | 76 mm | |
| Drive | Hexagon socket | |
| Professional / DIY | Profi | |
| With collar | No | |
| Anchor material | Stainless steel | |
| Number of washers | 0 | |
| Packing | Folding box | |
| IE, min | 15 mm | |
| l | 90 mm | |
| Surface protection sleeve | Untreated | |
| min. drill hole depth for pre-installation | 95 mm | |
| Surface protection anchor | Untreated |
Packaging units
| 1 Pack | 20 Pieces | |
| 1 Pallet | 1040 Pieces |
Identification & Classification
| Article number | 529722 | |
| Catalog number | 4877 | |
| EAN / GTIN | 4048962158335 | |
| Manufacturer number | 519019 | |
| Article class | RMM |
Description
Advantage:
- The international approvals guarantee maximum safety and the best performance.
- The internal threaded anchor allows the removal of the attachment and the fixing point can be reused.
- The design between the bolt and the sleeve ensures high shear load-bearing capacity. Thus, fewer fixing points are required.
- The optimised geometry intelligently reduces the energy required for assembly.
- The approval regulates the use of hollow drills.
Application Area:
- Steel constructions
- Guard rails
- Consoles
- Ladders
- Cable trays
- Machines
- Staircases
- Pipeline routes
- Ventilation systems
- Sprinkler systems
Approved for:
- Concrete C20/25 to C50/60, cracked and non-cracked
- Concrete C12/15
- Natural stone with dense structure
Application Notes:
- The FH II-I is suitable for pre-positioned installation.
- When a hexagon wrench is used for installation, the internal thread bolt starts to rotate. This pulls the cone into the expansion sleeve and expands it against the drill-hole wall. At the same time, the anchor is tightened through compression of the black plastic ring. A gap U to the concrete surface is created (see image 4).
- The anchor is set according to the approval when the gap U is 3-5 mm. Alternatively, an installation torque of Tinst can also be applied.