{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Internal threaded anchor galvanized steel FPX M 6 I
Article no.: 531950
Catalog no.: 4912
Article code:
Product details
Technical Data
| Internal thread | M6 | |
| Number of nuts | 0 | |
| min. anchorage depth | 70 mm | |
| Suitable for hollow-core concrete slab | No | |
| Fixing with expansion tool | Nein | |
| Drive | Hexagon socket | |
| Suitable for cracked concrete | No | |
| Suitable for non-cracked concrete | No | |
| Professional / DIY | Profi | |
| With collar | Nein | |
| Anchor material | Steel | |
| Environment | Inside | |
| Number of washers | 0 | |
| Packing | Folding box | |
| IE, min | 10 mm | |
| min. drill hole depth for pre-installation | 95 mm | |
| Surface protection sleeve | Galvanic/electrolytic zinc plated | |
| Surface protection anchor | Galvanic/electrolytic zinc plated | |
| Test marks / approvals | ETA - European Technical Assessment |
Packaging units
| 1 Pack | 25 Pieces | |
| 1 Pallet | 7800 Pieces |
Identification & Classification
| Article number | 531950 | |
| Catalog number | 4912 | |
| EAN / GTIN | 4048962158359 | |
| Manufacturer number | 519021 | |
| Article class | RMC |
Description
Advantage:
- The FPX-I enables easy tightening via the hexagon wrench using a cordless screwdriver or ratchet and therefore offers top installation comfort.
- The deformation-controlled expansion of the anchor with the hexagon wrench ensures safe, even and gentle installation.
- The unique 4-way expansion of the FPX-I with a square expansion sleeve prevents the rotation of the anchor in the drill hole and ensures high tension and shear loads, which means fewer fixing points.
- The releasing of the hexagonal wrench guarantees an automatical setting control for each installation process.
- The first steel anchor with an ETA-Approval and fire protection certificate for fixings in aerated concrete enables use for safety-relevant fixings, too.
Application Area:
- Suspended ceilings
- Cable trays
- Pipelines
- Ventilation ducts
- Guard rails/hand rails
- TV consoles
- Kitchen cupboards
- Stand-off installations
Approved for:
- Aerated concrete with compressive strength 2 to 7 N/mm²
- Aerated concrete wall or ceiling boards with compressive strength 3.3 to 4.4 N/mm²
- Planked aerated concrete masonry, e.g. plastered, tiled, papered etc.
Application Notes:
- The FPX-I with internal thread is suitable for pre-positioned installation.
- Pre-drilling enables easy hammering in, even in high-strength aerated concrete. There is no need to clean the drill hole.
- If the aerated concrete is covered with hard, non-load-bearing layers such as tiles, these must be pre-drilled with an outer diameter of 14 mm (M6-M10) or 16 mm (M12).
- When the anchor is tightened with the hexagon wrench, the internal thread sleeve starts to rotate and the cone is pulled into the square expansion sleeve. The aerated concrete is compressed on the four sides and generates an undercut in the drill hole.
- When reached the optimum expansion, the hexagon wrench is released automatically from the anchor.