{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. Nr.:
Cutting disc SGP STEELOX extra thin, Disc ⌀: 230mm
Article no.: 535624
Catalog no.: 563420
Article code:
- Grinding medium code: A
- Iron, sulphur and chlorine constituents: < 0.1
- Shape description: flat
- Bore ⌀: 22.23
- recommended approach angle: 90
Product details
Technical Data
| Grinding medium code | A | |
| Specification | A46S-SGP-INOX | |
| Iron, sulphur and chlorine constituents | < 0.1 % | |
| Shape | 41 | |
| Shape description | flat | |
| Disc ⌀ | 230 mm | |
| Disc thickness | 1.9 mm | |
| Bore ⌀ | 22.23 mm | |
| for material thicknesses | 5.7 mm - 9.5 mm | |
| recommended approach angle | 90 degrees | |
| optimised for material | Steel; HSS | |
| Propulsive equipment | Angle grinders | |
| maximum circumferential speed | 80 m/s | |
| maximum speed | 6,600 min-1 | |
| Type of product | Cutting disc |
Identification & Classification
| Article number | 535624 | |
| Catalog number | 563420 | |
| EAN / GTIN | 4007220522776 | |
| Manufacturer number | 4007220522776 | |
| Manufacturer/responsible person | August Rueggeberg GmbH & Co. KG, Hauptstraße 13, 51709 MARIENHEIDE, Germany, www.pferd.com |
Application Table
Description
Version:
- Grit, bonding, abrasive additives as well as reinforcement of the cut-off discs are optimised for maximum cutting performance and working life in their respective applications.
- Thin cutting discs (0.8 mm / 1.0 mm / 1.6 mm) specially suited for quick burr-free cutting with low thermal stress. On older angle grinders please ensure discs are precisely centred! Cutting discs from 2.0 mm disc thickness exhibit increased lateral stability, stiffness and service life.
- Shapes: Cutting discs flat (shape 41) or with depressed centre (shape 42).
Extra thin cutting disc for very quick low-burr cutting with low thermal stress and easy ergonomic cut guidance.
Very tough SGP special high-performance range with very high cutting performance and outstanding service life (hardness S).
Application:
For freehand cutting using electric and pneumatic angle grinders with maximum 80 m/s peripheral cutting speed vc.
Specification:
A46S-SGP-STEELOX.
Note:
The disc thickness should be at least 20% of the material thickness to be cut. For stainless steel, use cutting discs at reduced speed.