{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Solid carbide HPC drill, plain shank DIN 6535 HB, DLC, ⌀ DC p6: 4mm
Article no.: 536398
Catalog no.: 122608
Article code:
Product details
Technical Data
| Through-coolant | yes, with 25 bar | |
| Escape of cooling lubricant | with cooling lubricant exit, axially concentric | |
| Cooling lubricant | yes | |
| Wet maximum | suitable | |
| Interface position | on the machine | |
| Holder type | Plain shank | |
| Holder shape | form B | |
| Holder version | metric | |
| Holder size, metric | 0060 mm | |
| Dry machining | suitable only under restricted conditions | |
| Type of mounting | spigot | |
| Holder tolerance class | h$06 | |
| Shank diameter | 6 mm | |
| Shank length | 36 mm | |
| Holder diameter, ISO tolerance class | 6 mm | |
| Holder diameter, lower dimension | -0.008 mm | |
| Shank type | HB | |
| Air | suitable only under restricted conditions | |
| Cutter diameter, min. | 4 mm | |
| Cutter diameter, max. | 4 mm | |
| Configurable | no | |
| Tolerance of cutter diameter | tolerance class ISO | |
| Tolerance class ISO | p6 | |
| Flute length | 35.5 mm | |
| Distance from cutter corner to cutter tip | 0.73 mm | |
| Number of teeth | 2 | |
| Twist direction | right-hand | |
| Helix angle, min. | 15 degrees | |
| Helix pitch | 46.9 mm | |
| Angle, 1st step | 140 degrees | |
| Point geometry | A | |
| Product designation (type) | W | |
| Tool material | solid carbide | |
| Coating | DLC | |
| Interface | joint 1 | |
| Gauge length | 38 mm | |
| Usable length | 29.5 mm | |
| Overall length | 74 mm | |
| Functional length | 55.27 mm | |
| Weight | 30 g | |
| Cutting direction | right-hand cutting | |
| Tool version | solid carbide | |
| Standard | DIN 6537 L | |
| Data carriers | without data carrier | |
| Machining method | drilling into solid material | |
| Colour ring | yellow | |
| Machining strategy | HPC | |
| Type of product | indexable drill | |
| Content | single part |
Identification & Classification
| Article number | 536398 | |
| Catalog number | 122608 | |
| EAN / GTIN | 4045197568755 | |
| Manufacturer number | 122608 4 | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Application Table
N
360
N
400
N
350
N
150
N
120
N
90
N
80
N
70
N
80
N
160
N
200
N
80
N
80
Description
Version:
Spiral fluted, with 6 guide chamfers and internal coolant channels.
New generation of high performance pilot drills in the HPC range.
With 140° point angle and special p6 cutting edge tolerance for optimum generation of a pilot hole. High alignment accuracy and roundness of the pilot hole.
New generation of high performance pilot drills in the HPC range.
With 140° point angle and special p6 cutting edge tolerance for optimum generation of a pilot hole. High alignment accuracy and roundness of the pilot hole.
Note:
Flute length LC = L2 + 1.5 × DC.
For deep-hole drilling deeper than 16×D a pilot hole is recommended, and for deep-hole drilling from 20×D to 30×D it is essential. The generation of a pilot hole always improves process reliability.
For deep-hole drilling deeper than 16×D a pilot hole is recommended, and for deep-hole drilling from 20×D to 30×D it is essential. The generation of a pilot hole always improves process reliability.