{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
GARANT Diabolo solid carbide torus cutter HPC, TiAlN, ⌀ e8 DC / R1: 6/1,0mm
Article no.: 537468
Catalog no.: 206322
Article code:
Product details
Technical Data
| Through-coolant | no | |
| Entry of cooling lubricant | without cooling lubricant entry | |
| Escape of cooling lubricant | without cooling lubricant exit | |
| Wet minimum | suitable only under restricted conditions | |
| Vorschub pro Zahn Besäumen fz | 0.048 mm | |
| Max. cutting depth, Full slot milling | 0.3 mm | |
| Max. cutting depth, Side milling | 7 mm | |
| Wet maximum | suitable only under restricted conditions | |
| Eingriffsbreite max. ae | 0,2×D; 0,05×D | |
| Interface position | on the machine | |
| Holder type | plain shank | |
| Holder shape | plain shank | |
| Dry machining | suitable | |
| Holder tolerance class | h6 | |
| Shank diameter DS | 6 mm | |
| Length of shank LS | 36 mm | |
| Vorschub pro Zahn Kopierfräsen fz | 0.048 mm | |
| Shank type | HA | |
| Air | suitable | |
| Cooling lubricant | yes | |
| Series | Diabolo | |
| Manufacturer’s designation | GARANT Diabolo VHM-Torusfräser HPC, TiAlN | |
| Tool material | solid carbide | |
| Machining group | H (hard materials); P (steel) | |
| Cutter diameter Dc | 6 mm | |
| Tolerance of cutter diameter | tolerance class ISO | |
| Tolerance class | e8 | |
| Recess diameter D1 | 5.5 mm | |
| Cutting edge length Lc | 7 mm | |
| ISO milling cutter type | toroidal bull nose end mill | |
| Number of effective cutters (peripheral side) Z | 4 | |
| Twist angle | 30 degrees | |
| Corner / edge | 1 | |
| Corner version | as radius | |
| Corner radius R | 1 mm | |
| Spacing of the cutters | unequal spacing | |
| Direction of infeed | horizontal, oblique and vertical | |
| Number of clamping slots | 4 | |
| Tool application group | H | |
| Vorschub pro Zahn in | Steel < 65 HRC | |
| Coating | TiAlN | |
| Interface | joint 1 | |
| Gauge length A | 21 mm | |
| Overall length L | 57 mm | |
| Cutting direction | right-hand cutting | |
| Tool version | solid carbide | |
| Standard | Werksnorm | |
| Machining method | copy milling; shoulder milling (FEC); slot milling (FNU) | |
| Colour ring | red | |
| Machining strategy | HPC | |
| Type of product | shoulder mill | |
| Content | single part | |
| Correction factor fz | 1.25 | |
| Cutting depth min. | 0.01 mm | |
| Cutting depth in use | Full slot milling; Side milling; copy milling |
Identification & Classification
| Article number | 537468 | |
| Catalog number | 206322 | |
| EAN / GTIN | 4045197598271 | |
| Manufacturer number | 206322 6/1,0 | |
| Article class | 11X | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Application Table
P
200
H
190
H
170
H
150
H
110
Description
Version:
GARANT Diabolo:
Special geometry, coating and carbide, specially for hard machining.
Double relief ground side clearance angle.
Tolerance: Corner radius R1 = ±0.005 mm.
Special geometry, coating and carbide, specially for hard machining.
Double relief ground side clearance angle.
Tolerance: Corner radius R1 = ±0.005 mm.