{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
GARANT Diabolo solid carbide ball nose end mill HPC, TiAlN, ⌀ DC: 6mm
Article no.: 537753
Catalog no.: 207424
Article code:
Product details
Technical Data
| Cooling lubricant | no | |
| Wet minimum | unsuitable | |
| Series | Diabolo | |
| Wet maximum | unsuitable | |
| Manufacturer’s designation | GARANT Diabolo VHM-Vollradiusfräser HPC | |
| Dry machining | suitable | |
| Oil | unsuitable | |
| Air | unsuitable | |
| Tool material | solid carbide | |
| Coating | TiAlN | |
| Cutter diameter | 6 mm | |
| Cutting edge length | 12 mm | |
| Head length | 0 mm | |
| ISO milling cutter type | round profile mill | |
| Relief angle | 0 degrees | |
| Side rake angle | 0 degrees | |
| Number of effective cutters, peripheral side | 3 | |
| Number of effective cutters, end face | 3 | |
| Twist direction | right-hand | |
| Twist angle | 30 degrees | |
| Radius | 3 mm | |
| Tolerance of radius contour | ±0,01 | |
| Spacing of the cutters | the same | |
| Direction of infeed | horizontal, oblique and vertical | |
| Gauge length | 22 mm | |
| Overall length | 100 mm | |
| Weight | 38 g | |
| Cutting direction | right-hand cutting | |
| Tool version | solid carbide | |
| Standard | Werksnorm | |
| Machining method | Copy milling | |
| Colour ring | red | |
| Machining strategy | HPC | |
| Type of product | round profile mill | |
| Correction factor fz | 1.25 | |
| Cutting depth min. | 0.01 mm | |
| Max. cutting depth | 12 mm; 0.3 mm |
Identification & Classification
| Article number | 537753 | |
| Catalog number | 207424 | |
| EAN / GTIN | 4045197600462 | |
| Manufacturer number | 207424 6 | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Application Table
P
200
H
190
H
170
H
150
H
110
Description
Version:
Special geometry, coating and carbide for hard machining.
3 end face edges up to the centre. Can therefore be used as a true 3-flute drill in all cutting depths.
Tolerance: Radius contour = ±0.005 mm.
3 end face edges up to the centre. Can therefore be used as a true 3-flute drill in all cutting depths.
Tolerance: Radius contour = ±0.005 mm.