{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Torus milling head HPC, HB7820, ⌀ D h10 / R: 20/4mm
Article no.: 537832
Catalog no.: 210255
Article code:
Product details
Technical Data
| Through-coolant | yes | |
| Wet minimum | suitable only under restricted conditions | |
| Max. cutting depth, Side milling | 13 mm | |
| Wet maximum | suitable | |
| Eingriffsbreite max. ae | 1×D | |
| Interface position | on the machine | |
| Air | suitable only under restricted conditions | |
| Cooling lubricant | yes | |
| Series | TopCut | |
| Tool material | solid carbide | |
| Machining group | N (non-ferrous metals) | |
| Tool application group | W | |
| Grade | HB7820 | |
| Interface | joint 1 | |
| Overall length L | 25 mm | |
| Cutting direction | right-hand cutting | |
| Tool version | solid carbide | |
| Standard | Werksnorm | |
| Cutter diameter D1 | 20 mm | |
| Tolerance class | h10 | |
| Cutting edge length L1 | 15 mm | |
| Head length L | 25 mm | |
| Number of effective cutters (peripheral side) | 3 | |
| Number of effective cutters (end face) | 3 | |
| Twist direction | right-hand | |
| Helix angle | 42 degrees | |
| Machining method | shoulder milling (FEC); slot milling (FNU) | |
| Corner version | as radius | |
| Corner radius | 4 mm | |
| Direction of infeed | horizontal; vertical | |
| Machining strategy | HPC | |
| Content | single part | |
| Correction factor fz | 1.25 | |
| Cutting depth min. | 0.01 mm | |
| Cutting depth in use | Full slot milling; Side milling | |
| Type of product | end / face mill |
Identification & Classification
| Article number | 537832 | |
| Catalog number | 210255 | |
| EAN / GTIN | 4045197607553 | |
| Manufacturer number | 210255 20/4 | |
| Article class | 21M | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Application Table
N
580
N
550
N
400
N
350
Description
Note:
Standard application values for slots milled from solid at ap max≤ 0.5×D.