{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
HiPer Drill base body, 3×D, ⌀ DC: 19mm
Article no.: 537942
Catalog no.: 231605
Article code:
Product details
Technical Data
| Through-coolant | yes | |
| Escape of cooling lubricant | with cooling lubricant exit, axially concentric | |
| Cooling lubricant | yes | |
| Series | HiPer Drill | |
| Manufacturer’s designation | HiPer Drill Grundelement | |
| Interface position | on the machine | |
| Holder type | Plain shank | |
| Interface coding | ZYL02501015 | |
| Holder shape | plain shank | |
| Holder version | metric | |
| Holder size, metric | 0250 mm | |
| Type of mounting | spigot | |
| Shank diameter | 25 mm | |
| Shank length | 56 mm | |
| Cutter diameter, min. | 19 mm | |
| Body diameter | 25 mm | |
| Flute length | 60 mm | |
| Distance from cutter corner to cutter tip | 3.4 mm | |
| Attachment length, holder | 72.3 mm | |
| Number of cutting edges, total | 2 | |
| Guide elements | without guide elements | |
| Insert thickness | 6.8 mm | |
| Type of fastening for insert | S (with counterbore screwed through hole) | |
| Interface coding for insert | HOG-2316xx190 | |
| Interface coding for insert according to ISO TS 13399-60 | HOG-2316xx190 | |
| Insert designation | 231640 19 | |
| Interface | joint 1 | |
| Gauge length | 90 mm | |
| Usable length | 60 mm | |
| Overall length | 146 mm | |
| Weight | 297 g | |
| Cutting direction | right-hand cutting | |
| Machining method | drilling into solid material | |
| Type of product | indexable drill for cutter inserts | |
| Content | single part |
Identification & Classification
| Article number | 537942 | |
| Catalog number | 231605 | |
| EAN / GTIN | 4045197602800 | |
| Manufacturer number | 231605 19 | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Description
Version:
- Very high feed rates and maximum performance due to optimally matched geometries and materials.
- Precise positioning of the cutter insert due to Vee insert seating and secure clamping by the centre bore.
- High concentricity when assembled. (For holes up to IT9 accuracy)
- Shank support for optimum stability in operation.
Application:
For stationary and rotating use. For holes up to IT9 accuracy.
Note:
The insert screw must be replaced after every fifth change of cutter insert.
Further sizes up to ⌀ 50.99 mm available on request.
Clamp in a hydraulic chuck (such as No. 302026 size 20) for optimum radial run-out.
For optimum stability, clamp the drill so the overhang is as short as possible.
Further sizes up to ⌀ 50.99 mm available on request.
Clamp in a hydraulic chuck (such as No. 302026 size 20) for optimum radial run-out.
For optimum stability, clamp the drill so the overhang is as short as possible.