{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Indexable insert for milling BGHX 15L5 PCER, for Aluking tangential high-performance face mills / end mills, PCD
Article no.: 538507
Catalog no.: 214540
Article code:
Product details
Technical Data
| Max. cutting depth ap | 2.5 mm; 4.5 mm | |
| Wet maximum | suitable | |
| Dry machining | suitable | |
| Cooling lubricant | yes | |
| Base form | rectangular | |
| Width of insert B | 5 mm | |
| Thickness of insert S | 5 mm | |
| Insert version | right-hand | |
| Height of cutting edge | 5 mm | |
| Setting angle | 90 degrees | |
| Normal clearance angle (main cutting edge) | 30 degrees | |
| Normal clearance angle (flat cutting edge) | 7 degrees | |
| ISO-Code | BGHX 15L5 PCER | |
| Cutting depth ap, min. | 0.05 mm | |
| Cutting depth in use | Full slot milling; Side milling | |
| Min. feed rate fz | 0.25 mm | |
| Max. feed rate fz | 0.25 mm | |
| Tool material | PCD | |
| Machining group | N (non-ferrous metals); O (other) | |
| Cutting media, manufacturer’s designation | PKD | |
| Grade | PKD | |
| Insert thickness T | 5 mm | |
| Type of fastening for insert | T (with hole attached tangentially via hole) | |
| Interface coding for insert | BGHX 15L5 PCER | |
| Interface coding for insert according to ISO TS 13399-60 | BGHX 15L5 PCER | |
| Insert designation | BGHX 15L5 PCER | |
| Type of product | cutter insert | |
| With ISO code | yes | |
| Number of teeth | 2 pcs. | |
| Direction of action | right-hand | |
| Suitable for material | aluminium; non-ferrous materials (N); plastics | |
| Tolerance Class | H | |
| Machining method | shoulder milling (FEC) | |
| Finishing / roughing assignment | finishing | |
| Type of fastening | hole | |
| Cutter version | rounded (E) | |
| Number of potential uses | 2 pcs. | |
| Content | single part | |
| Correction factor fz | 2.5 |
Identification & Classification
| Article number | 538507 | |
| Catalog number | 214540 | |
| EAN / GTIN | 4045197608161 | |
| Manufacturer number | 214540 ALU | |
| Article class | 21L | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Application Table
N
3500
N
3500
N
1000
N
1000
N
1000
N
500
Description
Version:
With additional wide smooth flat chamfer.
Application:
For high cutting speeds and high surface quality. Preferably for use in adjustable insert seatings. Different types of inserts can be mixed.
Note:
Standard application values for ae = 1×D / ap = 3 mm, ap max = 5 mm.