{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Indexable insert for milling APMT 060204 ER, for Softcut® mills, HB7510
Article no.: 538536
Catalog no.: 215646
Article code:
Product details
Technical Data
| Max. cutting depth ap | 2 mm; 3 mm | |
| Wet maximum | suitable only under restricted conditions | |
| Dry machining | suitable | |
| Cooling lubricant | yes | |
| Series | Softcut® | |
| Base form | rhomboidal | |
| Thickness of insert S | 2.38 mm | |
| Insert version | right-hand | |
| Length of cutting edge l | 6.8 mm | |
| Corner radius R | 0.4 mm | |
| Normal clearance angle (main cutting edge) | 11 degrees | |
| ISO-Code | APMT 060204 ER | |
| Cutting depth ap, min. | 0.1 mm | |
| Cutting depth ap, max. | 4 mm | |
| Cutting depth in use | Full slot milling; Side milling | |
| Feed rate per tooth min. fz | 0.1 mm | |
| Feed rate per tooth max. fz | 0.1 mm | |
| Tool material | Carbide | |
| Machining group | P (steel) | |
| Cutting media, manufacturer’s designation | HB7510 | |
| Coating | CVD | |
| Grade | HB7510 | |
| Insert thickness T | 2.38 mm | |
| Type of fastening for insert | S (with counterbore screwed through hole) | |
| Interface coding for insert | APMT 060204 ER | |
| Insert designation | APMT 060204 ER | |
| Type of product | cutter insert | |
| With ISO code | yes | |
| Number of teeth | 2 pcs. | |
| Direction of action | right-hand | |
| Suitable for material | steel (P) | |
| Tolerance Class | M | |
| Type of fastening | hole | |
| Chip breaker | yes | |
| Cutter version | rounded (E) | |
| Number of potential uses | 2 pcs. | |
| Weight | 1 g | |
| Content | single part | |
| Correction factor fz | 2.5 |
Packaging units
| 1 Carton | 10 pieces |
Identification & Classification
| Article number | 538536 | |
| Catalog number | 215646 | |
| EAN / GTIN | 4045197601452 | |
| Manufacturer number | 215646 ST1400 | |
| Article class | 21A | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Application Table
P
220
P
200
Description
Note:
Standard application values for ae = 0.25×D. ap = 3 mm, ap max = 4 mm.