{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Indexable insert for milling X.LW...SR-S, for high feed rate indexable face mills, SC6525
Article no.: 538561
Catalog no.: 221926
Article code:
Product details
Technical Data
| Wet minimum | suitable only under restricted conditions | |
| Max. cutting depth ap | 1.5 mm; 1.5 mm | |
| Wet maximum | suitable only under restricted conditions | |
| Dry machining | suitable | |
| Air | suitable | |
| Cooling lubricant | yes | |
| Manufacturer’s designation | X.LW...SR-S | |
| Base form | base profile X | |
| Thickness of insert S | 3.18 mm | |
| Diameter of insert d | 7 mm | |
| Corner radius R | 0.8 mm | |
| Normal clearance angle (main cutting edge) | 11 degrees | |
| ISO-Code | XPLW060308-SR-D | |
| Insert size L | 6 mm | |
| Cutting depth ap, min. | 0.2 mm | |
| Cutting depth in use | Full slot milling; Side milling | |
| Feed rate per tooth min. fz | 0.2 mm | |
| Feed rate per tooth max. fz | 3 mm | |
| Tool material | Carbide | |
| Machining group | P (steel) | |
| Cutting media, manufacturer’s designation | SC6525 | |
| Coating | CVD | |
| Grade | SC6525 | |
| Insert thickness T | 3.18 mm | |
| Type of fastening for insert | S (with counterbore screwed through hole) | |
| Interface coding for insert | XP0603__3R | |
| Insert designation | XPLW060308-SR-D | |
| Type of product | cutter insert | |
| With ISO code | yes | |
| Number of teeth | 4 pcs. | |
| Suitable for material | steel (P) | |
| Tolerance Class | L | |
| Type of fastening | hole | |
| Number of potential uses | 4 pcs. | |
| Content | single part | |
| Correction factor fz | 2.5 |
Packaging units
| 1 Carton | 10 pieces |
Identification & Classification
| Article number | 538561 | |
| Catalog number | 221926 | |
| EAN / GTIN | 2050001742551 | |
| Manufacturer number | 5653585 | |
| Article class | 28E | |
| Manufacturer/responsible person | Kennametal Deutschland GmbH, Raiffeisenstraße 10, 61191 Rosbach vor der Höhe, Germany, www.kennametal.com |
Application Table
P
340
P
260
P
210
P
180
P
155
Description
Version:
Particularly thick indexable inserts with ground wiper chamfer.
Note:
Standard application values for ae = 0.3×D.
Downloads & documents
Suitable products
Services & product advisors
More search terms & categories
Tool material:
Carbide
Coating:
CVD
Type of product:
cutter insert
Category:
Indexable inserts for longitudinal turning tools & face turning tools
Category:
Indexable inserts for grooving tools
Category:
Indexable inserts for high feed rate milling cutter
Category:
Indexable inserts for side milling cutters & parting off milling cutters
Brand:
KENNAMETAL®