{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Storage shelf with lighting, suitable for type: 1000
Article no.: 561990
Catalog no.: 928140
Article code:
Product details
Technical Data
| RAL colour | RAL 7035 | |
| Material thickness | 1.5 mm | |
| Coating | powder-coated | |
| Colour, grey | Light grey | |
| Material | sheet metal | |
| Colour | grey | |
| Colour selection | GARANT colours | |
| Width | 920 mm | |
| Adjustable depth | no | |
| Depth | 300 mm | |
| Usable width | 880 mm | |
| Usable depth | 300 mm | |
| Installation height | 80 mm | |
| Load capacity | 25 kg | |
| Built-in lighting | yes | |
| With own On/Off switch | yes | |
| Nominal voltage | 250 V | |
| Power consumption | 18 W | |
| Illumination | 1’890 lm | |
| Colour temperature | 4’000 K | |
| Type of product | storage shelf | |
| Content | single part |
Identification & Classification
| Article number | 561990 | |
| Catalog number | 928140 | |
| EAN / GTIN | 4062406113322 | |
| Manufacturer number | 928140 1000 | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Description
Version:
Storage shelf as described under No. 928131. With integral tiltable LED lighting (arrangement as for No. 928600 with On/Off switch) underneath the storage shelf.
Colour:
Light grey RAL 7035, powder-coated, lampholder silver.
Note:
The lamp below the storage shelf incorporates built-in LED bulbs. The light source (LED bulbs) can be exchanged by the manufacturer. The operating unit (mains adapter and cable) can be replaced by the manufacturer.
Warning:
Intended use
Reasonably foreseeable misuse
- Use the workbench only when in good technical condition.
- If any faults occur which may affect safety, rectify them without delay.
- Only mount components on the designated holes Exclusively use approved Hoffmann Group accessories for modifications or rebuilding.
- For work in indoor industrial environments.
- For use on dry solid floors.
- Operate only in a dry environment.
Reasonably foreseeable misuse
- Do not place or position on the workbench.
- Do not carry people.
- Not for use in areas where the floor slopes upwards or downwards.
- Do not use in explosion hazard areas.
- No do expose it to water, precipitation or contamination.
- Not for use in areas where the floor is loose or unpaved.
- Do not overload the workbench, worktop, drawers or storage shelves.
- Do not make any unauthorised modifications.