{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Alternative article:
-
Article no.: 2230893
Indexable insert for milling SOMT 083604 PDER, for Softcut® HSI, HB7520
Article no.: 565820
Catalog no.: 214918
Article code:
Product details
Technical Data
| Wet minimum | suitable | |
| Wet maximum | suitable | |
| Dry machining | suitable | |
| Oil | suitable | |
| Air | suitable | |
| Cooling lubricant | yes | |
| Series | Softcut® | |
| Manufacturer’s designation | SOMT 083604 PDER; ST900 | |
| Base form | square | |
| Width of insert B | 8 mm | |
| Thickness of insert S | 3.6 mm | |
| Length of insert L | 8 mm | |
| Insert version | neutral | |
| Length of cutting edge l | 8 mm | |
| Corner radius R | 0.4 mm | |
| Corner chamfer length C | 0 mm | |
| Corner chamfer angle | 0 degrees | |
| Corner angle | 90 degrees | |
| Normal clearance angle (main cutting edge) | 17 degrees | |
| Normal clearance angle (auxiliary cutting edge) | 17 degrees | |
| Cutting conditions | continuous | |
| ISO-Code | SOMT 083604 PDER | |
| Tool material | Carbide | |
| Machining group | K (cast iron); M (stainless steel); P (steel) | |
| Coating | TiAlSiN | |
| Grade | HB7520 | |
| Insert thickness T | 3.6 mm | |
| Type of fastening for insert | M (with cyl. hole clamped from above and via the hole) | |
| Interface coding for insert | SOMT 083604 PDER | |
| Insert designation | SOMT 083604 PDER | |
| Type of product | cutter insert | |
| With ISO code | yes | |
| Standard | DIN ISO 1832 | |
| Number of teeth | 4 pcs. | |
| Direction of action | neutral | |
| Suitable for material | cast iron (K); stainless steel (M); steel (P) | |
| Tolerance Class | M | |
| Machining method | face milling (FPL) | |
| Finishing / roughing assignment | finishing; roughing | |
| Type of fastening | hole | |
| Chip breaker | yes | |
| Cutter version | sharp-edged (F) | |
| Cutting conditions | continuous | |
| Number of potential uses | 4 pcs. | |
| Content | 1 pcs. | |
| Correction factor fz | 2.5 |
Packaging units
| 1 Carton | 10 pieces |
Identification & Classification
| Article number | 565820 | |
| Catalog number | 214918 | |
| EAN / GTIN | 4045197674708 | |
| Manufacturer number | 214918 ST900 | |
| Article class | 21A | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Application Table
P
320
P
250
P
210
Description
Version:
Increased insert thickness permits markedly deep trough geometry for positive cutting action, and minimises the susceptibility to fracture.
Note:
Standard application values for ae = 0.3×D.