{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Indexable insert for milling PNMU 1205 ANER-SM, for face mills, PR1525
Article no.: 566931
Catalog no.: 222806
Article code:
Product details
Technical Data
| Cooling lubricant | yes | |
| Wet minimum | suitable | |
| Wet maximum | suitable | |
| Manufacturer’s designation | PNMU 1205 ANER-SM | |
| Dry machining | suitable | |
| Oil | suitable | |
| Air | suitable | |
| Base form | pentagonal | |
| Wide insert | 12.38 mm | |
| Thickness of the insert | 5.56 mm | |
| Length of cutting insert | 12.38 mm | |
| Insert version | right-hand | |
| Length of cutting edge | 12.38 mm | |
| Diameter of the cutting insert | 17.03 mm | |
| Corner radius | 0 mm | |
| Corner chamfer length | 2 mm | |
| Corner chamfer angle | 28.7 degrees | |
| Corner angle | 108 degrees | |
| Rake angle | 0 degrees | |
| Normal clearance angle (main cutting edge) | 0 degrees | |
| Normal clearance angle (auxiliary cutting edge) | 0 degrees | |
| Cutting conditions | continuous | |
| ISO-Code | PNMU 1205 ANER-SM | |
| Type of chip breaker | SM | |
| Wiper length axial | 2 mm | |
| Tool material | Carbide | |
| Machining group | K (cast iron); M (stainless steel); N (non-ferrous metals); P (steel); S (difficult-to-machine materials) | |
| Tool application group | PR1525 | |
| Cutting media, manufacturer’s designation | PR1525 | |
| Coating | Megacoat Nano | |
| Grade | PR1525 | |
| Insert thickness | 5.56 mm | |
| Type of fastening for insert | S (with counterbore screwed through hole) | |
| Interface coding for insert | PNMU 1205 ANER-SM | |
| Interface coding for insert according to ISO TS 13399-60 | PN1205AN3R | |
| Insert designation | PNMU 1205 ANER-SM | |
| Type of product | Cutter insert | |
| With ISO code | yes | |
| Standard | DIN ISO 1832 | |
| Number of teeth | 10 pcs. | |
| Direction of action | right-hand | |
| Suitable for material | cast iron (K); heat-resistant super-alloys (S); non-ferrous materials (N); stainless steel (M); steel (P) | |
| Tolerance Class | M | |
| Machining method | face milling (FPL) | |
| Finishing / roughing assignment | Finishing; Roughing | |
| Type of fastening | Hole | |
| Chip breaker | yes | |
| Cutter version | sharp-edged (F) | |
| Number of potential uses | 10 pcs. | |
| Weight | 15 g | |
| Content | 1 pcs. | |
| Correction factor | 2.5 |
Identification & Classification
| Article number | 566931 | |
| Catalog number | 222806 | |
| EAN / GTIN | 4960664671212 | |
| Manufacturer number | TLB05054 | |
| Manufacturer/responsible person | KYOCERA UNIMERCO Tooling GmbH, Hammfelddamm 6, 41460 Neuss, Germany, www.kyocera-unimerco.de |
Application Table
P
200
P
180
P
180
P
140
P
140
M
150
M
140
Description
Note:
Standard application values for ae = 0.3×D.