{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Indexable insert for milling WNEU 080608 EN-GL, for indexable milling cutters, CA6535
Article no.: 566947
Catalog no.: 225628
Article code:
Product details
Technical Data
| Cooling lubricant | yes | |
| Wet minimum | suitable | |
| Wet maximum | suitable | |
| Manufacturer’s designation | WNEU 080608 EN-GL | |
| Dry machining | suitable | |
| Oil | suitable | |
| Air | suitable | |
| Base form | pentagonal | |
| Wide insert | 8 mm | |
| Thickness of the insert | 6.35 mm | |
| Length of cutting insert | 8 mm | |
| Insert version | neutral | |
| Length of cutting edge | 8 mm | |
| Height of cutting edge | 6.65 mm | |
| Diameter of the cutting insert | 14.02 mm | |
| Corner radius | 0.8 mm | |
| Corner angle | 90 degrees | |
| Rake angle | 13 degrees | |
| Normal clearance angle (main cutting edge) | 0 degrees | |
| Normal clearance angle (auxiliary cutting edge) | 0 degrees | |
| Cutting conditions | continuous | |
| ISO-Code | WNEU 080608 EN-GL | |
| Attachment hole diameter | 6.2 mm | |
| Tool material | Carbide | |
| Machining group, manufacturer-specific | S | |
| Machining group | M (stainless steel); P (steel) | |
| Tool application group | HOG | |
| Cutting media, manufacturer’s designation | CA6535 | |
| Coating | CVD | |
| Grade | CA6535 | |
| Insert thickness | 6.35 mm | |
| Type of fastening for insert | S (with counterbore screwed through hole) | |
| Interface coding for insert | WN0806083N | |
| Interface coding for insert according to ISO TS 13399-60 | WN0806083N | |
| Insert designation | WNEU 080608 EN-GL | |
| Type of product | Cutter insert | |
| With ISO code | yes | |
| Standard | DIN ISO 1832 | |
| Number of teeth | 6 pcs. | |
| Direction of action | neutral | |
| Suitable for material | stainless steel (M); steel (P) | |
| Tolerance Class | E | |
| Machining method | shoulder milling (FEC) | |
| Finishing / roughing assignment | Finishing | |
| Type of fastening | Hole | |
| Chip breaker | yes | |
| Cutter version | sharp-edged (F) | |
| Cutting conditions | continuous | |
| Weight | 13 g | |
| Content | 1 pcs. | |
| Correction factor | 2.5 |
Identification & Classification
| Article number | 566947 | |
| Catalog number | 225628 | |
| EAN / GTIN | 4960664686568 | |
| Manufacturer number | TMA09313 | |
| Manufacturer/responsible person | KYOCERA UNIMERCO Tooling GmbH, Hammfelddamm 6, 41460 Neuss, Germany, www.kyocera-unimerco.de |
Application Table
M
240
M
200
S
40
Description
Version:
MEGACOAT-coated indexable inserts with 6 edges − due to double-sided version. The high axial rake angle up to a maximum of 13° significantly reduces the cutting force.
Ground version for significantly better surface quality.
Ground version for significantly better surface quality.
Application:
The GL geometry is suitable for good surface finishes thanks to the ground version and flat cutting edge.
Note:
Standard application values for ae = 0.3×D.