{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Load cell flat side form, Measuring range: 0-1,2kN
Article no.: 568102
Catalog no.: 479110
Article code:
Product details
Technical Data
| IP index of protection | IP43 | |
| Manufacturer’s designation | Kraftmessdose abgeflachte Form | |
| Packaging | case | |
| Power supply | no energy supply | |
| Index of protection / protection class | IP degree of protection | |
| Height of load cell | 38 mm | |
| Diameter of load cell | 90 mm | |
| Diameter of piston | 50 mm | |
| Area of piston | 10 cm2 | |
| DIsplay | analogue | |
| Test certificate | manufacturer’s test certificate | |
| Scale unit | kN | |
| Min. measured value | 0 kN | |
| Max. measured value | 1.2 kN | |
| Scale graduations | 0.05 kN | |
| Error limit | ±1,6 vom Messbereichsendwert (±2,5 mit Schleppzeiger) % | |
| Material of the housing | stainless steel | |
| Can be calibrated | yes | |
| Can be recalibrated | yes | |
| Type of product | load cell | |
| Min. operating temperature | -10 °C | |
| Max. operating temperature | 50 °C |
Identification & Classification
| Article number | 568102 | |
| Catalog number | 479110 | |
| EAN / GTIN | 2050001858818 | |
| Manufacturer number | 14361904 | |
| Manufacturer/responsible person | WIKA Alexander Wiegand SE & Co. KG, Alexander-Wiegand-Straße 30, 63911 KLINGENBERG AM MAIN, Germany, www.wika.de |
Description
Version:
Hydraulic load cell with directly attached pressure gauge for static and quasi-static force measurement.
Body and piston stainless steel, pressure gauge of pressed brass with memory pointer. Protected against contamination with foreign particles and water spray (IP43).
Body and piston stainless steel, pressure gauge of pressed brass with memory pointer. Protected against contamination with foreign particles and water spray (IP43).
Advantage:
When used in accordance with instructions, a leaktightness warranty of 5 years is given.
Function:
IP43: Protected against splashed water from directions up to 60° relative to normal operating position and protected against penetration by foreign bodies with ⌀ > 1 mm, however tools and wires should be kept away.
Application:
In machine tool building.
Particularly suitable for measurements on vices.
Particularly suitable for measurements on vices.
Supplied with:
Display unit, manufacturer’s certificate of conformity, and transport case.