{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
MFH Harrier high feed rate milling cutter with bore, for indexable inserts SO..
Article no.: 568187
Catalog no.: 222065
Article code:
Product details
Technical Data
| Through-coolant | yes | |
| Cooling lubricant | yes | |
| Series | MFH Harrier | |
| Manufacturer’s designation | MFH Harrier mit Bohrung | |
| Cutter diameter | 50 mm | |
| Body diameter | 47 mm | |
| Mounting hole diameter | 22 mm | |
| Setting angle | 10 degrees | |
| Number of effective cutters (peripheral side) | 5 | |
| Number of inserts total | 5 | |
| Overall length | 50 mm | |
| Max. speed | 10,000 min-1 | |
| Weight | 400 g | |
| Cutting direction | right-hand cutting | |
| Tool version | solid steel | |
| Machining method | circular milling (round milling); countersinking (plunge milling); face milling; slot milling | |
| Machining strategy | HPC | |
| Type of product | face mill | |
| Max. cutting depth | 1.5 mm |
Identification & Classification
| Article number | 568187 | |
| Catalog number | 222065 | |
| EAN / GTIN | 4960664707638 | |
| Manufacturer number | THN07671 | |
| Manufacturer/responsible person | KYOCERA UNIMERCO Tooling GmbH, Hammfelddamm 6, 41460 Neuss, Germany, www.kyocera-unimerco.de |
Description
Description:
MFH Harrier high feed rate indexable face mills enable short machining times thanks to high feed rates and high cutting depths. The approach angle in combination with the convex cutting edges reduces the cutting forces and minimises the tendency to vibrate.
Application:
For increased productivity in face milling, pocket milling and slot milling. Because the cutting forces are so low, large overhangs for plunge milling pose no problem.